20 June 2019 in Optics Express
Spoof surface plasmon (SSP) meta-couplers that efficiently integrate other diversified functionalities into a single ultrathin device are highly desirable in the modern microwave and terahertz fields. However, the diversified functionalities, to the best of our knowledge, have not been applied to circular polarization meta-couplers because of the spin coupling between the orthogonal incident waves. In this paper, we propose and demonstrate a terahertz spin-decoupled bifunctional meta-coupler for SSP excitation and beam steering. The designed meta-coupler is composed of a coupling metasurface and a propagating metasurface. The former aims at realizing anomalous reflection or converting the incident waves into SSP under the illumination of the right or left circular polarization waves, respectively, and the latter are used to guide out the excited SSP. The respective converting efficiency can reach 82% and 70% at 0.3THz for the right and left circular polarization incident waves. Besides, by appropriately adjusting the reflection phase distribution, many other functionalities can also be integrated into the meta-coupler. Our study may open up new routes for polarization-related SSP couplers, detectors, and other practical terahertz devices.
12 February 2020 in IEEE Antennas and Wireless Propagation Letters
A 1 bit single-polarization broadband space-time-coding digital metasurface element with a zero cross polarization is proposed. This element consists of a modified patch, an electronic switch, a dc-bias network, a ground plane, and two-layer dielectrics. The upper patch with edge loading and centered square hole is fully optimized to achieve broadband and stable phase difference between two states. By electronically controlling the diode, the element achieves a 1 bit phase shift with a relative bandwidth of 20% within 180° ± 30° from 7.71 to 9.43 GHz. Moreover, a negligible cross polarization is obtained due to the uniaxial symmetry of the structure, and the amplitude loss is less than 0.8 dB for two states. The experimental results measured in a rectangular waveguide are well matched with the simulations, further demonstrating validity of the proposed element.
19 March 2019 in Optics Letters
Reflective multichannel metasurfaces are flat reflectors that can control incident and reflected waves in a number of propagating directions simultaneously. However, they are always densely discretized with a high spatial resolution, which increases the manufacturing complexity. In this Letter, to the best of our knowledge, a new method that combines the array antenna theory with the metagratings theory is proposed. We demonstrate that the unit cells with a linear gradient phase in each period of the metasurfaces can eliminate specific space harmonics. With this method, multichannel metasurfaces can be designed with sparse unit cells, and high efficiency is maintained simultaneously. As proofs of the method, we design three different terahertz multichannel metasurfaces with no more than three unit cells per period. The simplification of structures can efficiently reduce the manufacturing complexity. This work may open up new routes in designing multichannel metasurfaces.
13 September 2022 in ACS Photonics
10 January 2020 in Optics Letters
Spoof surface plasmon meta-couplers are compact antennas that link propagating waves and surface waves. However, most of them are designed with a fixed phase gradient and channel for the incident waves with specific polarization, which limits their further applications in multichannel scenarios. In this Letter, a new, to the best of our knowledge, method that combines the Brillouin zone folding theory with the generalized Snell’s law is proposed. We demonstrate that when the phase gradient of the metasurface is large enough, Brillouin zone folding effect will occur, which will create dual phase gradient space in a single metasurface. With this method, we design two novel terahertz meta-couplers with functionalities of symmetrical and asymmetrical binary-channel spoof surface plasmon (SSP) excitation. Furthermore, finite element method simulations are performed to demonstrate their functionalities. Considering the orthogonality of the incident waves, there can be a total of four independent space channels to excite SSPs on one metasurface. This work may open up new routes in multichannel SSP meta-couplers and multibeam surface wave antennas.
3 March 2020 in IEEE Photonics Journal
Terahertz biosensing provides a suitable method to identify biomolecules due to their rich spectral fingerprint in this electromagnetic region. However, owing to the limitations of terahertz sources and detectors, the signal is weak and requires to be enhanced by particular technologies. In this paper, we propose a terahertz plasmonic biosensor based on Goos-Hänchen effect in graphene. Sample sensing can be realized by measuring the Goos-Hänchen shift of the reflected light. Numerical simulations show that the sensitivity of this biosensor can reach a high value up to $2.5 \times 10^4 \mu$ m/RIU. This graphene plasmonic configuration combined with Goos-Hänchen effect provides a novel high-sensitivity approach for future terahertz biosensing applications.