19 April 2011 in IEEE Journal of Selected Topics in Quantum Electronics
In this paper, we consider the role of carrier confinement in achieving high-power continuous wave (CW) room temperature operation of GaSb-based type-I quantum-well (QW) diode lasers at wavelengths above 3 μm. The use of compressive strain and quinternary barrier materials to confine holes in the active QWs allows the fabrication of 3-μm GaSb-based type-I QW diode lasers operating at 17 °C in the CW mode with output power of 360 mW. We will present the results of characterization of 2.2-μm diode lasers grown on metamorphic virtual substrates. The use of InGaSb virtual substrate makes it possible to fabricate devices with As free QWs. The prospects of using virtual substrates for development of GaSb-based type-I lasers will be discussed.
7 July 2008 in Applied Physics Letters
GaSb-based type-I quantum-well diode lasers emitting at at with of continuous wave output power are reported. Devices with two or four InGaAsSb compressively strained quantum wells and AlInGaAsSb quinternary barriers were fabricated and characterized. It was shown that increase in the quantum-well number led to improved laser differential gain and reduced threshold current.
3 March 2008 in Applied Physics Letters
Diode lasers emitting at were designed and fabricated. Device active region contained two compressively strained InGaAsSb quantum wells incorporated in quinternary AlInGaAsSb barriers. Laser output power at room temperature was in continuous wave regime and more than in pulse.
14 October 2010 in Electronics Letters
A continuous-wave, room temperature operation of type-I quantum well diode lasers was extended above 3.4 µm. The laser heterostructure, optimised for minimum threshold carrier concentration, was pseudomorphically grown by solid source molecular beam epitaxy on GaSb. Multimode lasers generate 29 mW of output power at 17 °C.
25 August 2008 in Applied Physics Letters
Mid-IR light emitting diodes with quinternary AlInGaAsSb barriers and InGaAsSb strained quantum wells grown on GaSb substrates have been demonstrated. The devices produced a quasi-cw emission power of 0.7 mW at room temperature and 2.5 mW at .
27 August 2009 in Electronics Letters
Type-I double-quantum-well GaSb-based diode lasers operating at 3 µm with room-temperature continuous-wave output power above 300 mW and peak power-conversion efficiency near 8% were designed and fabricated. Laser heterostructure comprised quinary AlGaInAsSb alloy as barrier and waveguide material. Use of quinary alloy resulted in adequate hole confinement. The waveguide thickness was chosen to maximise modal differential gain. Continuous-wave threshold current density about 100 A/cm2 per quantum-well and slope efficiency of 100 mW/A were demonstrated at 17°C.