14 November 2025 in IEEE Journal of the Electron Devices Society
This study reports the fabrication and characterization of a p-GaN/AlGaN/GaN heterostructure field-effect transistor (HFET) incorporating a boron nitride (BN) film. The BN film was deposited at room temperature via RF sputtering (RT-RF sputtering) onto a SiOx. passivation layer. A dual-layer passivation scheme–comprising the SiO. layer and the room-temperature-deposited BN film–was proposed to enhance interface quality and improve the on-resistance characteristics. The RT-RF sputtering BN film was found to increase the 2DEG density at the AlGaN/GaN interface without degrading the overall device performance. As a result, the on-resistance was reduced by 30%.
26 January 2026 in IEEE Electron Device Letters
A novel enhancement-mode (E-mode) p-GaN/AlGaN/GaN high-electron-mobility transistor (HEMT) featuring a diode-engineered gate configuration was developed to extend the gate voltage swing range. In the proposed design, a small diode is monolithically integrated in series to the p-GaN gate, introducing an additional forward voltage drop to the threshold voltage of the HEMT. This approach significantly increases both the threshold voltage and the maximum allowable gate voltage swing compared to conventional p-GaN gate HEMTs, which typically exhibit low threshold voltages and limited gate swing ranges. The device employs a standard heterostructure, and the compact size of the embedded diode ensures that the increase in chip area is negligible.
6 November 2026 in Semiconductor Science and Technology
In this work, enhancement-mode (E-mode) p-GaN/AlGaN/GaN high-electron-mobility transistors (HEMTs) with monolithically embedded gate diodes are investigated to explore the use of embedded diode width as a design parameter for threshold-voltage engineering. The embedded diode geometry modulates the electrostatic potential within the gate stack, thereby tuning the threshold voltage. A wide threshold-voltage tuning range of 1.45–3.3 V was achieved, where 1.45 V corresponds to the reference device without an embedded diode and 3.3 V corresponds to the device with a diode-to-HEMT channel ratio of 0.1. In addition, the diode-embedded structure exhibits improved forward gate breakdown voltage while maintaining comparable on-resistance and off-state breakdown voltage. Pulsed bias measurements reveal that smaller diode widths effectively suppress negative threshold-voltage shifts, indicating enhanced dynamic gate stability. These results demonstrate that monolithically embedded gate diodes provide an effective and scalable approach for threshold-voltage engineering and reliability enhancement in E-mode GaN HEMTs for power-switching applications.