27 March 2022 in Advances in Materials Science and Engineering
The void at the bottom of a cement concrete slab is a common problem of composite pavements. It is of great significance to evaluate the spring stiffness, void size, and soil base elastic modulus at the bottom of cement concrete slab timely and accurately for the maintenance and guarantee of the pavement performance. In this paper, the composite pavement at a joint is modeled and the load transfer mechanism is realized by using spring groups for simulating the dowels that connect the two slabs of the joint. A database is established based on a large number of simulation results of joint load transfer efficiency and voids and the changing law of load transfer efficiency of cement concrete slab reveals their relationship. Taking into consideration the spring stiffness, void size, and soil base elastic modulus, the void evalua\tion method of composite pavement cement concrete slab is established by using back propagation neural network algorithm. The results show that the void evaluation method can provide the void determination map with two parameters. The values of the two parameters can be determined by the deflection basin. After querying the Atlas, the void determination can be more accurate. The research results provide scientific guidance for the void identification of the composite pavement and can effectively extend the service life of the pavement.
14 September 2021 in Journal of Testing and Evaluation
Aging simulation methods for asphalt materials can be generally classified into two types: for asphalt binder and for asphalt mixture. Nevertheless, there exists the aging effect difference between aging patterns for asphalt binder and mixture due to differences in aging experimental conditions. The comparison of the aging effect difference between aging patterns for asphalt binder and mixture contributes to building the relationship and thus achieving a conversion of asphalt aging degree between its binder and mixture aging patterns. In this research, aging effect differences between aging patterns for binder and mixture were investigated in terms of short-term aging, long-term aging, and ultraviolet radiation (UV) aging. The binders were collected before and after different aging patterns and then characterized by physical, rheological, and chemical tests. The results indicate that the aging effect difference between thin film oven test and short-term oven aging test is slight, whereas the aging effect of pressure aging vessel test significantly outweighs the effects of long-term aging patterns with loose or compacted specimens. As for photo oxidation aging, the aging effect ranking from the highest to the lowest is UV aging with loose specimen, UV aging for binder, and UV aging with compacted specimen. In addition, regardless of long-term or UV aging pattern for mixture, the aging degree of binder in loose specimen is more serious than that in compacted specimen.