The effectiveness and cost-effectiveness of resurfacing maintenance treatments applied to low- and moderate-traffic asphalt pavements in Tennessee were evaluated based on the pavement condition data and costs of identified maintenance projects by single and multiple regression models. The investigated treatments include thin hot-mix asphalt (HMA) overlay, mill and fill, and microsurfacing. Survey results indicated that treatment service life slightly decreased as the traffic volume increased and the service life of thin HMA overlay, mill and fill, and microsurfacing are 11, 10, and 8.5 years, respectively. Linear models were established for both pretreatment and posttreatment pavement performance trends. The treatment effectiveness was calculated as the area bounded by the pretreatment and posttreatment performance curves, the lower performance threshold, and the treatment service life. It was found that traffic level and pretreatment pavement condition are significant for the effectiveness and co...
1 September 2013 in Journal of Transportation Engineering
The negative binomial (NB) and zero-inflated negative binomial (ZINB) models were employed to simulate the development of pavement transverse cracks on asphalt overlays and to evaluate the influence of different designs of asphalt overlays on crack development. Pavement transverse crack data were collected from 15 long-term pavement performance (LTPP) SPS-5 test sites. Analyzed factors include traffic level, overlay thickness, mixture [using reclaimed asphalt pavement (RAP) or virgin], intensity of surface preparation (mill or no mill) before overlay, total thickness of pavement, and freeze index. Analysis results indicate that the NB and ZINB models were effective in simulating the development of pavement transverse cracks by addressing the overdispersion. In addition, the ZINB model outperformed the NB model by explaining the excess zeros in the cracking count data to capture both the initiation and propagation of cracking. The regression analysis indicates that mill before overlay is effective ...