Background/Objectives: The motor-less fuel stand has been described capturing high-speed video in the process of fuel jet development in Common Rail type injector. Methods: The experiments were carried out simultaneously recording the electric signals of the start and end moments of the electrical impulse controlling the injector with digital color oscilloscope Tektronix TDS-2014С and high-speed imaging of the fuel jet sprays with color video camera FASTCAM SA-X2. Findings: The delays of the start and termination of actual fuel injection that depend on the electrical impulse for the injector control have been determined and the dynamics of the fuel jet development has been observed under the fuel rail pressure from 100 to 165 MPa. The dependency of the duration of the fuel injection process on the duration of the electrical impulse controlling the injector has been established. Applications/Improvements: The results of the study can be used for diesel engine design and commissioning and for improving the shape of the combustion chamber to ensure better carburetion in the cylinder.
1 December 2019 in Lecture Notes in Mechanical Engineering
The results of experimental research are provided regarding the operational process of VAZ-21124 petrol engine with the compression ratio of 12.0 on lean air-and-fuel mixtures with various values of heating the air charge at intake, and of the ignition advance angle. In the course of performing the experimental research, the pressure of gases in the engine cylinder was registered, as well as the temperature of the air charge in the intake manifold, the ignition advance angle, and the concentration of toxic components in the exhaust gases. The obtained pressure indicator diagrams were processed using a special program for determining indices of the operating cycle, cycle consumption of fuel and air, air excess factor, and heat release rate. The obtained cycle consumption of fuel and air, as well as the air excess factor were compared to the ones measured experimentally. As a result, possible boundaries of leaning of air-and-fuel mixture were revealed, as well as the values of heating the air charge, and of the ignition advance angle, for intensification of the process of combustion till the knock moment. When the air charge temperature at the intake was raised from 29°C to 112°C;, the ignition advance angle retarded from 35.5 to 15 degrees, and the air excess factor decreased from 1.55 to 1.41 respectively.