24 June 2021 in IEEE Transactions on Industrial Electronics
Foot-mounted inertial navigation with zero velocity update (ZUPT) is commonly used in pedestrian positioning. To suppress the accumulating position error owing to the low-cost inertial sensor, classical dual-foot pedestrian navigation method provides the compensation using the two feet's relative step length, whose values can be set an upper bound constraint or measured by ranging sensors. However, it suffers from low improvement and poor wearability. In this study, the two sensors are distributed on the toe and ankle of the same leg. The sensor-to-sensor position is unchangeable with the lower limb segments. This makes the uncoupled two subsystems be related. Through gait analysis, the step is divided into the stance and swing phases. For each phase, positions, velocities, and the related characteristics of the toe and the ankle are analyzed and modeled, respectively. A Kalman filter is constructed to fuse the position and velocity observations according to the geometric constraints and the foot vector. The Mahony filter by fusing the inertial sensor and magnetometer is adopted for the attitude improvement. Several experiments at low and high walking velocities on the plane and upstairs are carried out to verify the proposed method. The results show that compared with the conventional single-inertial measurement unit (IMU) ZUPT and dual-IMU two-foot constraint methods, the position and heading errors have been well suppressed.
18 February 2022 in Measurement Science and Technology
Inertial navigation technology composed of inertial sensors is widely used in foot-mounted pedestrian positioning. However, inertial sensors are susceptible to noise, which affects the performance of the system. Zero-velocity update (ZUPT) is a traditional method utilized to suppress the cumulative error. Unfortunately, the walking distance calculated by a Kalman filter still has positional error. To improve the positional accuracy, in this work we propose a nonlinear Kalman filter with a spatial distance inequality constraint for a single foot. Since the stride distance between adjacent stance phases has an upper bound in plane and height, an inertial navigation system established by one inertial measurement unit is adopted to constrain the stride process. Eventually, the performance of the proposed method is verified by experiments. Compared with the single foot-mounted ZUPT method, the proposed method suppresses the plane error and the height error by 46.04% and 65.48%, respectively. For the dual-foot constraint method, the proposed constraint method can reduce the number of sensors while ensuring positioning accuracy. Moreover, the height error is reduced by 59.98% on average by optimizing the constraint algorithm. The experimental results show that the trajectory estimated by the proposed method is closer to the actual path.
11 August 2022 in IEEE Transactions on Instrumentation and Measurement
Due to the low-cost magnetic/inertial measurement unit (MIMU) is easily affected by noise, the positioning result is inaccurate. In this study, to improve the precision of pedestrian positioning, a lower limb constraint model is constructed based on the gait characteristics and biomechanical relationship. Dual MIMUs are strapped to the foot and shank of the same leg to form a pedestrian inertial navigation systems (PINS). First, taking the MIMU mounted on the shank as the reference point, a new velocity constraint relation is established. Combined with kinematics and Coriolis theorem, the velocity of the reference point is calculated by two MIMUs, respectively. Then, the two calculations are optimized via a Kalman filter. Second, a geometric mode is built owing to the position relationship between the ankle and two MIMUs. Using cosine theorem, a correction method with complementary constraints is established. In addition, different from the traditional zero-velocity update (ZUPT), the velocity and geometric constraints are applied throughout the gait cycle. Consequently, the proposed constraint methods can effectively suppress the position drift. To verify the effectiveness of the proposed algorithm, several experiments with different trajectories and velocities are designed. The results show that the trajectories obtained by the proposed methods are closer to the actual situations.