The load identification of the crossbeams in high-speed trains is proving to be crucial, because of the complexity of its structure and environment. In this paper, a method to identify load of the crossbeam structure based on Bayesian finite element model updating and load-strain linear superposition algorithm is proposed. Firstly, the finite element model is established. Using the numerical simulation under different loads, the relative mean error of load identification is less than 0.5% and the effect of strain field reconstruction performs well. Based on the model test system, Markov Chain Monte Carlo method is used to update the parameters of the initial finite element model. Then an experimental setup is built with 64 FBG sensors installed on the crossbeam. The load identification results of Tikhonov regularization method, the load-strain linear superposition method before and after the Bayesian finite element model updating are analyzed and compared. The results show that the proposed method can significantly improve the accuracy of load identification.
Abstract—Optimizing sensor layouts for global strain detection of complex structures is a great challenge due to irregular shapes and complex loads. By combining global search and trajectory search, a multi-objective optimization method (MOLA) for sensor configuration is proposed. The optimization objectives are the number of sensors and the eigenvalue vector product (EVP), respectively. The EVP is the best performance index selected by Pareto Frontier solution and Hypervolume judging from seven common indicators, and the optimization function is constructed to obtain the best sensor layout. The load-strain linear superposition method is used to reconstruct the strain field with the high-speed train beam structure as the research object. Simulation and experimental results show that the optimization effect of this method is better than MOPSO, which provides a new perspective for the optimal layout of sensors for structural health monitoring.
18 August 2023 in IEEE Transactions on Instrumentation and Measurement
The crossbeam is a key load-bearing structure for high-speed trains which may be damaged with long-term load. Due to the large load area of the crossbeam and the harsh service environment, it is difficult to measure the load directly. To solve this problem, a load identification method based on neural network is proposed. Firstly, the load area is discretized and the relationship model between load and strain is derived. Secondly, an extreme learning machine (ELM) improved by sparrow search algorithm (SSA) load identification model (IELM) is derived, and strain and load are used as the input and output of the model, respectively. The method is evaluated by MAE, RMSE, MAPE, and R 2 , and the performance of the method is verified by simulations and experiments with the experimental MAE of 0.047 kN, RMSE of 0.086, MAPE of below 0.01, and R 2 of 0.995. In addition, this paper compares and analyzes the proposed method with Moore-Penrose method (MP), Tikhonov regularization with L-curve criterion method (TL), BP neural network method (BP), and ELM under different noise levels. The results show that the proposed method simultaneously identifies the position and amplitude of multiple loads of high-speed train crossbeams with higher accuracy and robustness, which provides a reference for load identification of high-speed train crossbeams.