Reversible bond exchange reaction gives Vitrimer resin the advantages of being recyclable and reprocessing. So the characterization of the interfacial bonding properties between Vitrimer and carbon fibre is of great interest for aerospace applications. In this study, a kind of thermosetting resin containing bond exchange reaction was configured by adding zinc acetylacetonate catalyst to the conventional thermosetting resin. The force–displacement curve was obtained by microbond tests, and the experimental results showed that the newly configured resin has higher interfacial shear strength. A finite element simulation was established based on cohesive contact model (CZM), and the interface parameters of the CZM were inverted by using finite element update method (FEUM) in combination with the experimental data. And the pull-out force–displacement curves obtained from the numerical simulation are in good agreement with the experimental data. The interfacial stress transfer and debonding failure behavior is further discussed. Graphical abstract
1 June 2021 in Journal of Physics: Conference Series
In order to reveal the mechanism of interfacial debonding damage of composite hat-stiffened panel, an eight-point bending model of single stiffened structure was designed. The finite element analysis was carried out by using the cohesive element to simulate debonding damage of interface between skin and rib. The deformation, interface stress and structural damage of the eight-point bending as well as the corresponding stiffened panel under axial compression were analyzed. The results showed that the initial debonding deformation was in good agreement with the interface stress distribution. For the eight-point bending model, although more damage appeared near the loading point due to stress concentration, it had little effect on the accurate prediction of interface damage behavior. The eight-point bending model can be used to evaluate the interface performance of corresponding multi-stiffened-panel during axial compression buckling by accurate simulation and parameter design, and it is helpful for the stiffness matching design of skin and stiffener.