To improve braking performance and regenerative energy of front drive electric vehicles (EVs) driven by switched reluctance motor (SRM), a regenerative braking control strategy based on multi-objective optimization of switched reluctance generator (SRG) drive system is proposed in this paper. Firstly, a partition braking force distribution strategy is developed by jointly considering braking energy and safety, and SRG drive system model is established based on low and high-speed condition. The vehicle braking system model including mechanic and regenerative braking system is built. Then, a multi-objective optimization function with three weight factors is defined, where output generated power, torque smoothness, and current smoothness are selected as optimization objectives to improve the driving range, braking comfort, and battery lifetime, respectively. Furthermore, a multi-objective optimization controller with variable switch angles is designed and combined with vehicle braking system. Finally, braking energy recovery efficiency, braking smoothness, and charging current smoothness under the multi-objective optimization controller for SRG are analyzed and compared with those under output power optimization controller. The comparison results show that the regenerative braking control strategy based on multi-objective optimization of SRG can effectively increase the vehicle braking comfort and improve battery lifetime without decreasing recovery energy.
20 July 2022 in IEEE/ASME Transactions on Mechatronics
To improve the comprehensive performance of the electromechanical coupling braking system (CBS) and suppress vertical vibration caused by the unbalanced radial forces of in-wheel motors, a CBS control strategy based on multiobjective optimization on the control parameters of switched reluctance motor (SRM) drive system is proposed in this article. First, the electromagnetic coupling and eccentricity characteristics of SRM are analyzed, and a multiobjective optimization strategy (MOOS) for the SRM-drive system is proposed to comprehensively improve the endurance mileage, battery life, and braking comfort. Then, switch angles and required regenerative braking force are optimized by the combination of MOOS and genetic algorithm, and the corresponding optimized controllers are established. Furthermore, the braking performance of optimized CBS is analyzed and compared to the other three single-objective optimization strategies (SOOSs), and the results indicate that the control strategy with MOOS can improve vehicle comprehensive performance, although the strategies with SOOSs have a great improvement for corresponding objectives. Meanwhile, based on the strategies, comprehensive switchable control logic is proposed to improve the overall performance of vehicles under different braking modes. Finally, the results from the simulation and processor in loop test are analyzed and compared, which validates the real-time performance and effectiveness of the control strategy.
In the single-phase excitation mode of a four-phase 8/6 switched reluctance motor (SRM), the switch angle for each phase is usually high enough to improve the performance of the SRM, which can directly result in overlapping in excitation periods of each adjacent phase. Ignoring the torque variation caused by magnetic coupling between adjacent charged phases during excitation overlap period, which is a general method to establish the model of SRM currently, would greatly influence the accuracy of the simulation model. Aiming at the problem of the general modeling method, a new SRM ontology modeling method is proposed by considering overlapping excitation, based on nonlinear mathematical model established by means of mutual inductance which could influence the electromagnetic characteristics of SRM. Firstly, the reason of interactive excitation and the distribution of the magnetic field are analyzed by (FEM), and the mathematical model is also developed. Then, the detailed static characteristics including mutual inductance and torque are analyzed based on the results of FEM, which are compared with those of the model without considering the effects of interactive excitation. Furthermore, the dynamic simulation model of SRM drive system (SRD) is built, and the simulation results are analyzed and compared with those of the traditional model. Finally, a static experiment is designed and performed to verify the mutual inductance and static torque under long magnetic circuit (LMC) and short magnetic circuit (SMC) in interactive excitation. The comparison results show that the data from experiment are greatly consistent with those from FEM, and the characteristics of mutual inductance and torque under interactive excitation should be considered when establishing the model of SRM.