Cross Laminated Timber (CLT, XLAM) is a product extremely well suited for multi-storey buildings because of its versatility. With lengths up to 16 meters and the possibility of extending with mechanical joints or glued connections, widths of up to 2.5 meters depending on manufacturer and thicknesses up to 500mm, almost any necessary shape can be found on the market today. Developments are still going on rapidly and new possibilities and new applications far from being exhausted. One such new possibility is the use of CLT elements in a combination with a concrete core and structural outriggers in very high buildings, a ́wood-concrete skyscrapeŕ. CLT has already been shown to be very efficient in multi-storey buildings up to 10 storeys. In this paper, an analysis is given of how a concrete core and CLT walls can be used to design very tall buildings in the range of up to 150 meters, but for more than 80% made of timber products. Timber can become an alternative in rapidly expanding cities, where there is a need for high apartment buildings. The building layout uses outriggers at certain intervals, integrated tension cables and CLT structural wall elements in the facades. The design makes optimal use of the advantages of light-weight building elements with comparable structural performance as traditional concrete elements. Savings during the erection stage in terms of money and time are highlighted as well as the CO2 emissions of such a building in comparison with concrete. A concept of the building has been analysed for the location of Shanghai according to the Chinese wind load specifications
This paper analyzes the load-carrying capacity of timber–concrete joints made with dowel-type fasteners. The scope of the work was to obtain information to be used in the design of timber–concrete composite structures. In order to achieve that, two different approaches were used: experiments with timber–concrete joints loaded in shear, and the use of nonlinear analytical models. Shear tests were performed using various timber species, concrete mixtures, and fasteners. The results from these tests are presented and compared with the results determined with three different analytical models. These models differ in the approach used to simulate concrete: linear–elastic, linear–elastic with crushing, and elastic–perfectly plastic. The analysis of the test results shows that the load-carrying capacity of this type of joint is significantly influenced not only by the strength of the materials but also by the shape of the fastener. From the three models proposed, the one assuming elastic–perfectly plastic behavi...
1 January 2017 in Construction and Building Materials