25 October 2019 in Welding Technology Review
Due to the increasing demand for connecting cells in packets to power electric tools, bicycles and electric cars, the issue of the quality of battery cells with busbars joints with the use of external heat electrodes is particularly important. The paper presents the conditions of the joining process and modelling results using the DC source. Modelling was performed using commercially available Sorpas 3D software. It included checking the influence of the busbar shape, clamping force, electrode material, the shape of electrode face, the length of the tungsten inserts in the welding electrodes on the amount of heat and the diameter of the connections. Modelling results revealed in particular increased heat generation and connection diameters for electrodes with a smaller work surface, however, industrial practice shows that the electrode face diameter durability is limited and that the electrodes flatten - the electrode face diameter increases.
1 January 2015 in Solid State Phenomena
Friction stir welding (FSW) is a recently developed method for making a rigid joint of materials that are otherwise hard to weld. It uses a rotating tool for softening the materials without reaching the melting point, and while the tool is moved along the joint line the plasticised material from the joined materials is mixed and hardened producing the solid phase bond. The article presents the authors’ method for monitoring the Friction Stir Welding (FSW) processes with use of thermal imaging camera.FSW method is a new method and there are only few tools to assess the quality of the process, especially on-line, that is in the making of the weld. The authors propose a method for monitoring the FSW process using hybrid vision methods that is acquisition of the image of the weld with the use of a thermal imaging camera and visual band camera. The paper presents selected results of research performed using infrared imaging channel.The recorded thermograms allow identifying the weld defects and non-compliances during the process and using a thermal imaging camera, also allow detecting subsurface defects. The obtained results indicate its potential practical application but still the described application is to be further developed to become a part of a hybrid system for monitoring the FSW processes.
21 March 2025 in Archives of Civil Engineering
The resistance spot welding is one of the main methods used to join thin-walled metal parts, while a number of factors adversely affect the process and thus the quality of the connections made. This article presents the study results of the possibility of applying modal analysis in the quality examination of welded parts by detecting the missing weld. It was aimed to determine this kind welding process imperfections influence on modal shapes and frequencies by the study of the dynamic properties of welded elements in the frequency domain. The research included real and numerical tests. The proposed testing method for spot welded constructions is a scientific novelty in the world, but the investigation results indicated, that the modal analysis may find application in detecting welding defects such as the lack of the welds. To assess the quality of the numerical models, the results obtained in the simulation and experimental test results were compared. The analysis involved the first five modes. The mode shapes in relation to the first five modal frequencies identified using the FEM analyses and the experimental tests was consistent with respect to element distortion. The differences indicate the satisfactory conformity of the numerical simulation results with the experimental test results. The article fundamentally demonstrates the applicability of the above-mentioned method to analyse the performance of all welds at once.
10 November 2013 in Welding Technology Review
W artykule przedstawiono wyniki optymalizacji procesu zgrzewania garbowego blach (garb niepełny) dla materiału DX53 i grubości 1,5 mm. Przeprowadzono obliczenia MES z wykorzystaniem oprogramowania SORPAS. Dokonano zmian parametrów zadanych procesu zgrzewania w szerokim zakresie tj. prądu zgrzewania od 8 do 12 kA, siły docisku elektrod od 110 do 440 dan (od 50% do 200% wartości nominalnej) i czasu zgrzewania 300 ms. Uzyskane wyniki przedstawiono w formie tabelarycznej, obrazów rozkładu temperatury i analizy graficznej wielkości jądra zgrzeiny od parametrów zadanych (prąd zgrzewania, siła docisku elektrod) wykorzystując oprogramowanie do analizy danych STATISTICA.Projection welding by finite elements method calculation AbstractThe article presents the results of the optimisation of projection welding of 1.5 mm thick DX53 steel grade sheets (incomplete projection) carried out with the help of a pneumatic electrode pressure system. The research-related FEM calculations were made using the SORPAS software. Welding process pre-set parameters were changed in a wide range of a) welding current (8kA - 12kA), electrode pressure force (110dan - 440dan) (from 50% to 200% of the nominal value); welding time being 300ms. The results obtained, depending on the preset parameters (welding current, electrode pressure force) are presented in the form of tables as well as the images of temperature distribution and of the weld nugget graphic analysis. The presentation of the results was prepared using the STATISTICA data analysis software.