A rotating wireless power transfer system based on a mixed flux coupler and dual-path parallel compensation is proposed in this article. It can achieve stable and efficient wireless power transmission as well as accurate speed monitoring without adding an additional excitation, solving the problems of voltage instability and low efficiency in existing solutions. First, the system topology and working principle are presented. Then, the working characteristics of the mixed flux coupler are analyzed and optimized. The power, efficiency, and voltage gain formulas are derived for the system based on a dual-coupled inductor–capacitor–capacitor-series compensation. Based on these theories and the functions that need to be achieved, a number of key design criteria are discussed. Practical experiments on rotating wireless power transmission, speed measurement, and dual-load interference have been carried out. The experimental results show that the proposed system can achieve accurate speed monitoring and stable wireless power transmission. The maximum power of the system can reach 163.59 W, and a maximum efficiency of more than 80% can be achieved. The proposed technique has the potential to significantly contribute to the further development of wireless power transfer technology for rotating machines, such as wind turbines, machining equipment, and robot joints.
15 August 2024 in IEEE Transactions on Power Electronics
A multioutput isolated power supply system based on magnetic coupling resonance (MOIPS-MCR) technology is proposed in this letter. It can not only selectively switch between constant voltage (CV) and constant current (CC) output modes at each receiver but also flexibly adjust the number of receivers, achieving high flexibility, high efficiency, and high security of power supply to multiple devices. The topology of the MOIPS-MCR was first introduced. Then, the output voltage and current expressions for each receiver in different modes were derived, and the principle of adjusting the number of receivers was introduced. An experimental prototype with two receivers was produced to validate the system's performance. Experimental results demonstrate that load-independent CV and CC modes at each receiver of the system and the flexible adjustment of the number of receivers can be achieved.