Temperature has a great influence on the stability of bearing performance. For the study of bearing steady-state temperature, this paper proposes a test method to quickly predict the steady-state temperature of the outer ring of a bearing, which solves the problems in traditional theoretical calculations and simulation analysis methods such as the large number of calculations, complex models, and large errors. Firstly, a mathematical prediction model is established according to the bearing temperature-rise law; then, a bearing steady-state temperature detection device is designed; and finally, the prediction model parameters are solved according to the experimental results, and experimental verification is carried out. It is shown that the prediction model has high accuracy under different load and speed conditions, and the error between the predicted steady-state temperature and the tested steady-state temperature is less than 0.7 °C. This prediction method reduces the single test time of the same speed to 60 min, which greatly improves the efficiency of the temperature detection test. The steady-state temperature model has important theoretical significance in guiding the study of the limiting speed of bearings.
Ore is a crucial component in the process of industrialization, and its crushing is a practice that is inextricably linked to our society. This study aims to simulate the crushing process of minerals in a comminution device using the Discrete Element Method (DEM) by characterizing the bonding parameters of mineral particles. Utilizing the EDEM software (2018) for discrete element simulations, the study investigated the influence of bonding parameters on the compressive strength and other performance indicators of the particle bonding model. The study was executed through the application of a Box–Behnken Design (BBD) and Response Surface Methodology (RSM), which facilitated the construction of a second-order response surface regression model. The optimal values for normal stiffness per unit area, shear stiffness per unit area, critical normal stress, and critical shear stress were meticulously determined. The subsequent simulation experiments strongly verify the feasibility of the proposed characterization method for key parameters.