In this study, we investigated the deformation behaviour of metal–graphene nanolayered composites for five face-centred cubic metals under compression using molecular dynamics simulations. It was found that by increasing the thickness of the individual metal layers, the composite strength increased, while the deformation mechanism changed from buckling to deformation twining in Cu, Au and Ag, which was absent in the monolithic form of those metals of the same orientation and size. The deformation twinning was found to be enabled by the graphene layer, which introduced pseudoelasticity and shape memory effects in the nanolayered membrane with more than 15% recoverable compressive strain.
22 January 2018 in Journal of Radiological Protection
Exposure buildup factors are very important for the calculation of radiation shielding and also applied radiation. We must distinguish the monoenergetic and continuous energy spectrum gamma source in order to calculate the exposure buildup factors. In this study, the exposure buildup factors for two x-ray continuous energy spectra (bremsstrahlung) with 5 and 10 MeV endpoint energies were calculated up to depths of 10 mfp of water. It was observed that there is a large difference between the obtained exposure buildup factors due to the monoenergetic and continuous energy spectrum gamma sources. The calculation results show that the relative differences in 5 MeV energy for 1 mfp to 10 mfp are 114% to 44%, respectively, and also the relative differences in 10 MeV energy for 1 mfp to 10 mfp are 87% to 38%, respectively. Actually, the main purpose of this paper is to illustrate the fact that there is a significant difference between the exposure buildup factors due to the continuous and monoenergetic gamma sources. Therefore, radiation staff must pay more attention to calculating the thickness of radiation shields for continuous energy gamma sources.