1 January 1988 in IEEE Journal on Robotics and Automation
1 December 2003 in IEEE/ASME Transactions on Mechatronics
It has been shown that redundant actuation provides an effective means for eliminating singularities of a parallel manipulator, thereby improving its performance such as Cartesian stiffness and homogeneous output forces. Based on this concept, several high-performance parallel manipulator prototypes have been designed. A major difficulty that prevents application of the vast control literature developed for the serial counterparts to redundantly actuated parallel manipulators is the lack of an efficient dynamical model for real-time control. In this paper, using the Lagrange-D'Alembert formulation, we propose a simple scheme for computing the inverse dynamics of a redundantly actuated parallel manipulator. Based on this approach, four basic control algorithms, a joint-space proportional derivative (PD) control, a PD control in generalized coordinates, an augmented PD control, and a computed-torque control, are formulated. A two-degrees-of-freedom redundantly acutated parallel manipulator designed for a high-speed assembly task is used to verify the simplicity of the proposed approach and to evaulate the performance of the four control algorithms.
1 January 1990 in IEEE Transactions on Robotics and Automation
1 August 1989 in The International Journal of Robotics Research
A new avenue of progress in the area of robotics is the use of multifingered robot hands for fine motion manipulation. This paper treats two fundamental problems in the study of multi fingered robot hands: grasp planning and the determination of coordinated control laws with point contact models. First, we develop the dual notions of grasp stability and grasp manipulability and propose a procedure for task modeling. Using the task model, we define the structured grasp quality measures, and using these measures we then devise a grasp planning algorithm. Second, based on the assumption of point contact models, we develop a computed torque-like con trol algorithm for the coordinated manipulation of a multi fingered robot hand. This control algorithm, which takes into account both the dynamics of the object and the dynamics of the hand, will realize simultaneously both the position trajec tory of the object and any desired value of internal grasp force. Moreover, the formulation of the control scheme can be easily extended to allow rolling and sliding motion of the fingers with respect to the object.
8 August 2007 in IEEE Transactions on Robotics
Mechanism synthesis is mostly dependent on the designer's experience and intuition and is difficult to automate. This paper aims to develop a rigorous and precise geometric theory for analysis and synthesis of sub-6 DoF (or lower mobility) parallel manipulators. Using Lie subgroups and submanifolds of the special Euclidean group SE(3), we first develop a unified framework for modelling commonly used primitive joints and task spaces. We provide a mathematically rigorous definition of the notion of motion type using conjugacy classes. Then, we introduce a new structure for subchains of parallel manipulators using the product of two subgroups of SE(3) and discuss its realization in terms of the primitive joints. We propose the notion of quotient manipulators that substantially enriches the topologies of serial manipulators. Finally, we present a general procedure for specifying the subchain structures given the desired motion type of a parallel manipulator. The parallel mechanism synthesis problem is thus solved using the realization techniques developed for serial manipulators. Generality of the theory is demonstrated by systematically generating a large class of feasible topologies for (parallel or serial) mechanisms with a desired motion type of either a Lie subgroup or a submanifold.
24 May 2010 in IEEE/ASME Transactions on Mechatronics
Reduction of contour error is the main control objective in contour-following applications. A common approach to this objective is to design a controller based on the contour error directly. In this case, the contour error estimation is a key factor in the contour-following operation. Contour error can be approximated by the linear distance from the actual position to the tangent line or plane at the desired position. This approach suffers from a significant error due to linear approximation. A novel approach to contour error calculation of an arbitrary smooth path is proposed in this paper. The proposed method is based on coordinate transformation and circular approximation. In this method, the contour error is represented by the coordinate of the actual position with respect to a specific virtual coordinate frame. The method is incorporated in a position loop-based cross-coupled control structure. An equivalent robust control system is used to establish stability of the closed-loop system. Experimental results demonstrate the efficiency and performance of the proposed contour error estimation algorithm and the motion control strategy.