27 April 2016 in Advanced Energy Materials
6 December 2016 in Journal of Materials Chemistry A
Affordable and scalable energy storage systems are necessary to mitigate the output fluctuation of an electrical power grid integrating intermittent renewable energy sources. Conventional battery technologies are unable to meet the demanding low-cost and long-life span requirements of a grid-scale application, although some of them demonstrated impressive high energy density and capacity. More recently, the prototype of an Al-ion battery has been developed using cheap electrode materials (Al and graphite) in an organic room-temperature ionic liquid electrolyte. Here we implement a different Al-ion battery in an inorganic molten salt electrolyte, which contains only an extremely low-cost and nonflammable sodium chloroaluminate melt working at 120 °C. Due to the superior ionic conductivity of the melt electrolyte and the enhanced Al-ion interaction/deintercalation dynamics at an elevated temperature of 120 °C, the battery delivered a discharge capacity of 190 mA h g−1 at a current density of 100 mA g−1 and showed an excellent cyclic performance even at an extremely high current density of 4000 mA g−1: 60 mA h g−1 capacity after 5000 cycles and 43 mA h g−1 capacity after 9000 cycles, with a coulombic efficiency constantly higher than 99%. The low-cost and safe characteristics, as well as the outstanding long-term cycling capability at high current densities allow the scale-up of this brand-new battery for large-scale energy storage applications.
26 October 2016 in Advanced Functional Materials
12 February 2016 in ChemSusChem
15 February 2017 in Advanced Materials
21 November 2012 in RSC Advances
Single crystalline Na2Ti3O7 rods were prepared through sintering a precursor synthesized in a reverse micelle. Charge/discharge measurements were performed in the potential range 0.01–2.5 V versus Na/Na+ under different C-rates. The tested capacity was maintained at 103 mA h g−1, even after 20 cycles at a rate of 0.1 C. The results exhibited that the as-prepared single crystalline Na2Ti3O7 rods had a very low voltage plateau (around 0.3 V), and were suitable to use as anode materials for sodium-ion batteries.