16 June 2017 in Journal of Applied Physics
The microstructure of Nb3Sn layers in multifilamentary composites manufactured by bronze technology and the internal-tin (IT) method differing in the strand design has been studied. The IT strands of International Thermonuclear Experimental Reactor (ITER) type and high-Jc type are characterized by both the higher Sn concentration and the higher fraction of equiaxed grains than bronze-route composites. In all the samples under study, the fraction of equiaxed grains correlates with the average concentration of Sn in Nb3Sn layers. The Ti doping of the bronze matrix in the bronze-processed wires results in the reduction in average grain sizes of Nb3Sn grains and in a higher fraction of equiaxed grains with a higher Sn concentration, which leads to a higher non-Cu Jc (calculated as a ratio of critical current Ic to a cross-sectional area of a strand without stabilizing Cu), 997 A/mm2 at 12 T, 4.2 K, compared to a composite of the same design with artificially Ti-doped Nb filaments. The ITER type IT strand demonstrates a somewhat higher fraction of equiaxed Nb3Sn grains with much larger average grain sizes (120 nm). The grain coarsening in this IT strand results in a decrease in Jc compared to other ITER type strands studied. The highest values of Jc are ensured in the high-Jc type of IT wires with 7 extended tin sources by the highest fraction (92%) of equiaxed Nb3Sn grains despite their coarser sizes (92 nm).
1 October 2017 in Journal of Magnetism and Magnetic Materials
EVE.G. Valova-Zaharevskaya
1 January 2018 in Physics of Metals and Metallography
EVE. G. Valova-Zaharevskaya
E. G. Valova-Zaharevskaya
The microstructure and thermal stability of multifiber in situ Cu-18Nb composites with a true strain ( e) of 10.2 and 12.5 have been studied by the methods of scanning and transmission electron...
7 December 2017 in Physical Review B
Electric injection and detection of spin-polarized electrons in InSb semiconductors have been realized in nonlocal experimental geometry using an InSb-based “lateral spin valve.” The valve of the composition has semiconductor/insulator/ferromagnet nanoheterojunctions in which the thickness of the InSb layer considerably exceeded the spin diffusion length of conduction electrons. The spin direction in spin diffusion current has been manipulated by a magnetic field under the Hanle effect conditions. The spin polarization of the electron gas has been registered using ferromagnetic probes by measuring electrical potentials arising in the probes in accordance with the Johnson-Silsbee concept of the spin-charge coupling. The developed theory is valid at any degree of degeneracy of electron gas in a semiconductor. The spin relaxation time and spin diffusion length of conduction electrons in InSb have been determined, and the electron-spin polarization in InSb has been evaluated for electrons injected from through an MgO tunnel barrier.
22 January 2016 in IEEE Transactions on Applied Superconductivity
EVEvgeniya Valova-Zaharevskaya
Evgeniya Valova-Zaharevskaya
The structure and morphology of superconducting Nb 3 Sn layers in multifilamentary internal tin (IT) wires have been studied by transmission electron microscopy and scanning electron microscopy. The composites under study differed in the initial Sn concentration, the presence of strengthening Cu-Nb inserts, and the number of Nb filaments and their diameter in the final wire. In all the analyzed wires, columnar Nb 3 Sn grains were always present. The Nb 3 Sn grains are coarser and their size distribution is wider in the filaments of IT strands compared with the bronze-processed wires, the J c in the former being as high as 2276 A/mm 2 . Much lower J c values (850 A/mm 2 ) were observed in a wire with a smaller diameter and a higher number of Nb filaments, which is not only due to the lower Sn concentration in the matrix but also to larger sizes and size scattering of equiaxed Nb 3 Sn grains, as well as to wider zones of columnar grains.
9 March 2022 in IEEE Transactions on Applied Superconductivity
In the present study the structure and morphology of the Nb 3 Sn grains in experimental samples of internal-tin (IT) wires with a distributed diffusion barrier and different wire diameters have been studied by SEM and TEM. The results of these studies demonstrate the strong dependence of the fraction of subelements with residual niobium and cavities in tin sources, as well as the average grain size and composition of Nb 3 Sn phase on the diameter of strands (1.0 mm, 0.7 mm, and 0.5 mm). The results of the analysis of the microstructure help to choose the optimal diameter of strands and show the ways to increase Jc to a required level for high-field applications.