Contaminants of emerging concern, which frequently come from pharmaceuticals, personal care products, and industrial waste, pose a significant risk to water quality. Among them, caffeine stands out for being widely used in numerous products in the beverage, food, and supplement industries, and for being frequently detected in surface waters. This work aims to evaluate caffeine adsorption in a fixed-bed column using activated carbon modified with graphene oxide (GO) as an adsorbent. Characterization analysis indicated slight caffeine deposition on the material’s surface after adsorption. The effect of changing caffeine inlet concentration, flow rate, and packed bed height was investigated throughout fixed-bed adsorption tests. The experimental breakthrough curves were modeled using the Thomas and Yoon–Nelson models, exhibiting R2 > 0.96. Results with better removal efficiencies were obtained for a higher caffeine inlet concentration (45 mg L-1) and lower inlet flow rate (4 mL min-1). Overall, the adsorbent exhibited satisfactory results, with caffeine removal over 60% and a maximum experimental adsorption capacity of approximately 93 mg g-1, confirming that activated carbon modified with graphene oxide can be a prominent option for continuous water treatment processes.