16 December 2020 in Journal of Advanced Transportation
Travel time reliability (TTR) is widely used to evaluate transportation system performance. Adverse weather condition is an important factor for affecting TTR, which can cause traffic congestions and crashes. Considering the traffic characteristics under different traffic conditions, it is necessary to explore the impact of adverse weather on TTR under different conditions. This study conducted an empirical travel time analysis using traffic data and weather data collected on Yanan corridor in Shanghai. The travel time distributions were analysed under different roadway types, weather, and time of day. Four typical scenarios (i.e., peak hours and off-peak hours on elevated expressway, peak hours and off-peak hours on arterial road) were considered in the TTR analysis. Four measures were calculated to evaluate the impact of adverse weather on TTR. The results indicated that the lognormal distribution is preferred for describing the travel time data. Compared with off-peak hours, the impact of adverse weather is more significant for peak hours. The travel time variability, buffer time index, misery index, and frequency of congestion increased by an average of 29%, 19%, 22%, and 63%, respectively, under the adverse weather condition. The findings in this study are useful for transportation management agencies to design traffic control strategies when adverse weather occurs.
8 November 2025 in Accident Analysis & Prevention
1 November 2022 in Journal of Transportation Engineering, Part A: Systems
This paper considers the stability of mixed traffic flow and the necessity of speed control to achieve safety and efficiency goals. Therefore, a speed-coordinated control model is proposed for mixed traffic flow based on stability analysis at an expressway merging area. Firstly, stability intervals are obtained by using an intracluster stability analysis in an intercluster. Secondly, a speed-coordinated control model is set up considering the stability characteristics in a merging area. Finally, an objective function is developed, which considers time-to-collision (TTC), dynamic space occupancy (DSO), and vehicle specific power (VSP). A numerical simulation is built up to analyze the traffic conditions and stability by using the proposed model against a null scenario without using the proposed model. The analysis results indicate that the stability of the intracluster has two regions, and the stability of the intercluster is mainly affected by the speed fluctuation and the distance between the merging cluster and the vehicles on the main road. Secondly, the proposed model tends to gradually achieve a steady state when the position reaches 180 m. Meanwhile, the efficiency of the model is found to be the best when the minimum safe-distance interval is set at (18, 27). In addition, the volatility of TTC drops by 5% and the DSO has reached 11.99% in the acceleration lane optimization together with 18.37% in the main lane optimization. The frequency is found to be the highest when the VSP reaches (10, 20), and the optimized efficiency reaches 45%–50%. The model proposed in this paper will effectively analyze the stability characteristics of mixed traffic flow and provides a research foundation for the stability of mixed traffic flow. Moreover, this model builds up a multi-objective-oriented speed-coordinated control scheme for high-efficiency operations in the merging area and provides technical support for traffic management in the future.
21 October 2020 in Journal of Advanced Transportation
Inclement weather affects traffic safety in various ways. Crashes on rainy days not only cause fatalities and injuries but also significantly increase travel time. Accurately predicting crash risk under inclement weather conditions is helpful and informative to both roadway agencies and roadway users. Safety researchers have proposed various analytic methods to predict crashes. However, most of them require complete roadway inventory, traffic, and crash data. Data incompleteness is a challenge in many developing countries. It is common that safety researchers only have access to data on sites where a crash has occurred (i.e., zero-truncated data). The conventional crash models are not applicable to zero-truncated safety data. This paper proposes a finite-mixture zero-truncated negative binomial (FMZTNB) model structure. The model is applied to three-year wet-road crash data on 395 divided roadway segments (total 586 km), and the parameters are estimated using the Markov chain Monte Carlo (MCMC) method. Comparison indicates that the proposed FMZTNB model has better fitting performance and is more accurate in predicting the number of wet-road crashes. The model is capable of capturing the heterogeneity within the sample crash data. In addition, lane width showed mixed effects in different components on wet-road crashes, which are not observed in conventional modeling approaches. Practitioners are encouraged to consider the finite-mixture zero-truncated modeling approach when complete safety dataset is not available.
1 January 2025 in Journal of Advanced Transportation
This paper develops a method for estimating carbon‐emission specific road networks, considering the presence of electric vehicles (EVs). A mixed equilibrium traffic assignment model is set up to obtain the traffic volume for each link in the network, where oil‐fueled vehicles (OFVs) prioritizing travel time minimization, while EVs also consider charging station locations and battery charge state in route selection. A carbon‐emission estimation method is then developed, which is calculated by three parameters of traffic volume, average speed, and the road category. A case study is carried out using two networks. It is found that the travel time of the road network has increased by 27%, because EVs tend to choose paths containing charging stations. The route selection of EVs is affected by perceived risk, safe electric quantity, and expected charging electricity. EVs can reduce carbon dioxide emissions but not energy consumption for road network. In addition, it was found that the location of charging stations has a significant impact on traffic flow. After optimizing the location of charging stations, the total travel time, total carbon emissions, and balance of charging station utilization indicators in the transportation network have all relatively decreased. Among them, the total travel time has decreased by 0.2%, the total carbon emissions have decreased by 1.85%, and the balance of charging station utilization has decreased by 0.95%. The research is helpful for determining the locations of charging piles and designing road networks, and it is also helpful for estimating the traffic flow and carbon emissions.