20 July 2022 in IEEE Transactions on Microwave Theory and Techniques
In this article, we present a novel ultrawideband branch waveguide coupler (BWC) with low amplitude imbalance. This novel design is based on a new structure of branch waveguide obtained by symmetrically increasing the waveguide width. The coupling degree can be independently controlled by the height and width of the new branch waveguide, which significantly increases the design flexibility. In addition, this structure can produce a transmission zero (TZ), and a concept to improve the fractional bandwidth of the BWC with out-of-band TZ is proposed. Based on the analysis, the design guidelines for the novel BWC are provided. For a given center frequency, an n-branch novel BWC can be easily designed. Moreover, because of the larger branch waveguide height, this novel design has greatly eased the machining difficulty. Finally, to verify the design concept, a $W$ -band eight-branch prototype is processed and measured. In full $W$ -band, the amplitude imbalance is less than 0.52 dB, the phase imbalance is less than 2.5 $^{\circ}$ , the return loss (RL) is greater than 21.4 dB, and the isolation is greater than 20.5 dB. The simulation and experimental results are in good agreement.
21 February 2022 in IEEE Microwave and Wireless Components Letters
This letter presents the design of a state-of-the-art 330-GHz subharmonic mixer (SHM) using planar Schottky diodes. Unlike conventional mixers, the embedded impedances of the diode chip are accurately extracted and then used for direct synthesis of the diode’s peripheral circuit to efficiently design SHMs with good performance. Band-stop filters (BSFs) using symmetrical open stubs are adopted to recycle RF and local oscillator (LO) energy while simplifying the circuit. At room temperature, the mixer exhibits a single sideband (SSB) conversion loss (CL) of less than 10 dB from 292 to 356 GHz, with 3 mW of LO power at 164.5 GHz. A minimum SSB CL of 7.5 dB is achieved at 334 GHz. The measured return losses at RF and IF ports are typically better than 14 dB.
13 June 2024 in Journal of Lightwave Technology
Terahertz (THz) wave technology has garnered significance in various cutting-edge applications in recent years, including 6G communications, high-resolution imaging, and non-destructive detection. The challenge of generating wideband THz signals has catalyzed significant research efforts. This paper focuses on the advancement of wideband frequency hopping technology and its use in THz systems to enhance the robustness and security of information transmission, thereby mitigating the potential impact of interference and eavesdropping. We propose a scheme for generating ultra-wideband frequency hopping THz signals based on optical injection locking, which is capable of automatically and precisely selecting specific frequencies from an optical frequency comb based hopping set, and also simultaneously providing power amplification. This scheme offers both flexible tunability and narrow-band filtering compared to traditional methods, enabling dynamic management of THz frequency coordinates within the optical domain following optical beating. Rate equation modeling of semiconductor lasers under optical frequency comb injection conditions is elaborated to investigate the nonlinear dynamics, and thereby determine the optimal conditions for injection-locking state through numerical solutions. Experimental validation confirms operational functionality in the 115-140 GHz range with a 5 GHz hopping interval across six channels, resulting in a total hopping bandwidth of 25 GHz. Additionally, high-speed wireless transmission of Quadrature Phase Shift Keying (QPSK) signals at a 5 Gbps rate are successfully achieved, with a bit error rate (BER) of ${\bf 2.5\times 10^{-3}}$ . This will be a viable solution for secure terahertz frequency-hopping wireless communications.
11 July 2024 in Journal of Lightwave Technology
Millimeter wave (MMW) and terahertz technology has garnered great interest in various fields due to its wide bandwidth availability. However, generating MMW signals that concurrently possess a high frequency, extensive bandwidth, and broad tuning range presents significant challenges. We propose a photonic approach for generating MMW signals leveraging photonic multiplication and delay-matched heterodyne. This method expands the signal bandwidth through four-wave mixing (FWM) and optical sideband heterodyne beating, extending beyond traditional external modulation schemes. By adjusting the seed light frequency for FWM or modifying the electrical driving signal, the system can span a wide range of spectrum and realize multi-octave tuning of the operating frequency. Furthermore, spurious signal and distortion arising from time-delay mismatch between the sidebands are resolved and eliminated through photonic delay matching. Experimental demonstration of MMW signal generation, showcasing random frequency hopping with up to 30 GHz bandwidth across multiple bands—Ku&Ka (13-40 GHz), W (75-105 GHz), and D (140-170 GHz) bands, verifies the system's extensive tunability and broad frequency coverage. In addition, a variety of multiwaveform types were produced, including stepped frequencies, linear, and nonlinear frequency sweeps, further illustrating the system's versatile waveform configurability. This work holds potential for significant advancements in MMW communications, radar and imaging applications.
10 April 2024 in IEEE Transactions on Electron Devices
A novel two-terminal vertical bridge structure nanoscale vacuum electronic device (NVED) is proposed to optimize the device structure for improved frequency characteristics in this study. By introducing a bridge structure, the sacrificial layers used for supporting between the electrodes are completely released, resulting in suspended electrodes. This successful implementation has significantly reduced the interelectrode capacitance to a level comparable to that of planar lateral devices. As a result, the frequency characteristics of the vertical structure device have been greatly enhanced. The fabrication of this device is obtained by a combination of atomic layer deposition (ALD) and buffered oxide etching (BOE), which is compatible with the CMOS process. The emission characteristics of the fabricated device under atmospheric conditions are measured with excellent stability and repeatability. More importantly, for the first time, the scattering parameters of the NVED have been measured under 0-V bias conditions within a frequency range of 10 MHz–10 GHz. A high-frequency small-signal model has also been established and validated against the measured parameters, demonstrating good consistency over the entire frequency range. Ultimately, the study successfully validates the frequency conversion functionality of the proposed NVED. These results highlight the potential of the device for operation in the high-frequency range, which is particularly significant in communication and radar applications.
2 March 2023 in IEEE Microwave and Wireless Technology Letters
In this letter, we proposed a novel 180–210 GHz single sideband (SSB) Schottky diode-based subharmonic mixer (SHM), which features in simpler structure and fabrication compared with existing methods. Image rejection of the 220–250 GHz upper sideband (USB), as well as impedance matching, was achieved by a filtering waveguide-microstrip transition structure at the radio frequency (RF) input, rather than using traditional waveguide filters. Eventually, the mixer was measured to show great performance, including a SSB conversion loss (CL) of 8–12 dB across the passband, and an image rejection ratio (IRR) of 15–35 dB.