Ghanshyam Mishra

Ghanshyam Mishra

Auto-generated profile, based on publicly available information

Ghanshyam Mishra

Department of Electrical and Computer Engineering, San Diego State University at San Diego, San Diego, CA, USA

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 April 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
KJKumud Ranjan Jha
Kumud Ranjan Jha
BBBisma Bukhari
Bisma Bukhari
CSChitra Singh
Chitra Singh
GMGhanshyam Mishra
Ghanshyam Mishra
SSSatish Kumar Sharma
Satish Kumar Sharma
A novel compact single-substrate planar multiband 5-element multiple input multiple output (MIMO) antenna system is presented in this paper. The tunable 2-element folded meandered MIMO antenna covers the long-term evolution (LTE) frequency bands below 1.0 GHz (687 MHz-813 MHz) and radio frequency identification (RFID) bands centered around 2.4 GHz and 5.8 GHz. The other 2-element compact MIMO antennas operate over 754 MHz - 971 MHz, 1.65 GHz -1.83 GHz, 2 GHz-3.66 GHz, and 5.1 GHz-5.6 GHz frequency bands. Furthermore, the proposed antenna elements are integrated with a wideband sensing antenna for the spectrum sensing in 0.668 GHz-1.94 GHz and 3 GHz-4.6 GHz which also acts as the ground plane for the MIMO elements in the cognitive radio (CR) application environment. The antenna is fabricated on a 65 mm × 120 mm × 1.56 mm low-cost FR-4 substrate. The antenna’s radiation characteristics are experimentally verified and results are in agreement with the full-wave simulation. The 3D radiation pattern based envelope correlation coefficient (ECC) of the MIMO antennas are also experimentally verified which is below the desired value of 0.5. Finally, to show its utility at the internet of things (IoT) platform, the antenna is tested in the realistic application environment.

12 June 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
GMGhanshyam Mishra
Ghanshyam Mishra
SSSatish Kumar Sharma
Satish Kumar Sharma
JCJia-Chi Samuel Chieh
Jia-Chi Samuel Chieh
We propose a novel series-fed circularly polarized traveling wave antenna known as the ‘Butterfly’ antenna suitable for operation at the millimeter-wave frequencies. The Butterfly unit-cell consists of a sequentially rotated series-fed linear array of four microstrip patch antennas. The proposed circularly polarized Butterfly structure offers low cross-polarization radiation and wide axial ratio beamwidth. A periodic leaky-wave antenna (LWA) analysis provides insights into the radiation characteristics of the Butterfly series-fed linear array antenna, which is validated by the full-wave electromagnetic simulations. The open-stopband (OSB) is suppressed in the broadside direction due to the cancellation of the internal reflections within each cell of the sequential-phase fed linear array. The measured and the simulated axial ratio, radiation patterns, and gain are presented for the broadside radiation of the parallel-series fed 8 × 24 and 32 × 24 planar array antenna at 86 GHz. The average measured 3 dB gain beamwidths are 9.5° and 2.9° along the ϕ = 0° plane of the 8 × 24 and 32 × 24 planar array antenna, respectively.

14 December 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
GMGhanshyam Mishra
Ghanshyam Mishra
SSSatish Kumar Sharma
Satish Kumar Sharma
JCJia-Chi S. Chieh
Jia-Chi S. Chieh
A novel W-band left-hand circular polarized (LHCP) cylindrical waveguide feed horn antenna is proposed. The proposed antenna features an inbuilt polarizer structure and a single side-fed linear polarized input to offer symmetric LHCP radiation pattern. The internal polarizer structure consists of 9 pairs of circular cavities to generate a circularly polarized wave, eliminating the need for an orthomode transducer or a complex septum. The side-fed horn reduces the overall length by eliminating rectangular to circular waveguide transition. The proposed horn antenna’s electrical dimension is 7.2λ × 3.9λ × 1.4λ at 84 GHz. The antenna has impedance matching (S11 below -15 dB) and axial ratio below 1.2 dB from 79.5 GHz to 88 GHz. The horn is used as a feed source for an offset parabolic reflector of 10 cm diameter and small f/D ratio 0.25 which can fit inside a CubeSat. The reflector antenna provides simulated right-hand circular polarization (RHCP) directivity of 36.6 dBic at 86 GHz with spillover loss of 0.83 dB. The feed reflector assembly is also simulated with the complete aluminum CubeSat chassis. The measurement of the prototyped feed horn and the offset parabolic reflector antenna validates the analysis and simulation results.

11 August 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
NLNingning Luo
Ningning Luo
XYXinhua Yu
Xinhua Yu
GMGhanshyam Mishra
Ghanshyam Mishra
SSSatish Kumar Sharma
Satish Kumar Sharma
In this letter, a high-performance dual circularly-polarized (CP) circular waveguide horn antenna operating in the V-band (54 60 GHz) is analysed, built, and tested. The antenna is designed from a cylindrical waveguide section and consists of two mutually orthogonal side-fed ports, a mono-groove, and a conical horn section. The mono-groove is an annulus sector placed at 45 with respect to both the input ports and provides a phase delay of 90 to generate right- and left-hand circular polarization (RHCP and LHCP). Simulation results show that the proposed CP horn antenna has inter-port isolation more than 15 dB, axial ratio (AR) below 2.2 dB, and polarization isolation over 25 dB in the impedance matching bandwidth from 54 60 GHz. Also, the proposed antenna provides symmetric radiation patterns. A prototype of this antenna has been fabricated using CNC (Computer Numerical Control) machining technique. The experimental results show good agreement with the simulated ones. This horn can used to feed a parabolic reflector antenna.

6 April 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
GMGhanshyam Mishra
Ghanshyam Mishra
SSSatish Kumar Sharma
Satish Kumar Sharma
A novel multifunctional staggered $8\,\,\times12$ Butterfly phased array antenna is proposed at Ka -band (28 GHz) for 5G communications with key features of full-polarization reconfigurability, flexible radiation pattern, and wide-angle 1-D-beam steering performance. The unit cell of the proposed array is a two Butterfly radiating antennas separated by $2\lambda \text{g}$ ( $\lambda \text{g}\,\,=$ effective wavelength) with two ports, where each Butterfly is a sequentially rotated series-fed microstrip patch antennas. Full-polarization reconfiguration (right-hand circular polarization (RHCP), left-hand circular polarization (LHCP), Linear-X, and Linear-Y polarization) is achieved by suitable excitation of the ports to realize increased system capacity. Flexible radiation pattern with dynamic 3 dB gain-beamwidth from 16° to 90° is achieved to realize a variable cellular range, angle, and gain requirements. The proposed staggered planar array configuration reduces the spacing between the adjacent series-fed linear array to $0.45\lambda _{0}$ , where $\lambda _{0}$ is the free-space wavelength at 28 GHz. The proposed array size of $8\,\,\times12$ Butterfly provides beam steering up to ±63° without any grating lobes. Analytical study using a periodic leaky-wave antenna (LWA) theory is included to provide insights into the radiation characteristics of the Butterfly series-fed linear array antenna. The beam steering characteristics were verified by using measured patterns of the individual branches and by applying the computed array factor. The full-polarization reconfiguration and flexible radiation patterns with sidelobe reduction are implemented and experimentally verified with a 16-channel Analog Devices ADMV4821 RFIC Ka -band beamformer.

1 January 2018
Verified
Conference Paper
Closed access
SKSandhya Krishna
Sandhya Krishna
GMGhanshyam Mishra
Ghanshyam Mishra
SSSatish K. Sharma
Satish K. Sharma
A 1 dimensional (D) beam steering planar microstrip patch array antenna with through element technology at 28 GHz is designed. The frequency spectrum chosen is one of the Federal Communications Commission (FCC) released 5G bands - 27.5 GHz to 28.35 GHz. The proposed antenna shows good isolation between the antenna ports of the array, flexible radiation patterns and beam steering capabilities. Thus, it can be employed for the multiuser massive multiple input multiple output (MU-MIMO) applications by exploiting the features of digital beamforming technique.