The improvement of electrochemical detection of meloxicam is presented bymodification of a glassy carbon electrode with anionic layer of cysteic acid providingelectrostatic accumulation of the analyte onto the electrode surface. The modificationformed by electrochemical oxidation of L-cysteine was performed by cycling potential incysteine solution. The anodic peak current obtained at 1.088 V (vs. Ag/AgCl) byvoltammetry was linearly dependent on the meloxicam concentration in the range of 4.3 ×10-8 ~ 8.5 × 10-6 M in the B-R buffer solution (0.04 M, pH 1.86) with a correlationcoefficient of 0.999. The detection limit (S/N = 3) is 1.5 × 10-9 M. The low-cost modifiedelectrode shows good sensitivity, selectivity and stability and has been applied to thedetermination of meloxicam in pharmaceutical formulation and spiked serum withsatisfactory results. The electrochemical reaction mechanism of meloxicam was discussed.
An improvement of selectivity for electrochemical detection of dopamine (DA)with differential pulse voltammetry is achieved by covalently modifying a glassy carbonelectrode (GCE) with O-carboxymethylchitosan (OCMCS). The amphiphilic chitosanprovides electrostatic accumulation of DA onto the electrode surface. In a phosphate buffersolution (pH 6.0), a pair of well-defined reversible redox waves of DA was observed at theOCMCS/GCE with a δEp of 52 mV. The anodic peak current obtained from thedifferential pulse voltammetry of dopamine was linearly dependent on its concentration inthe range of 6.0 × 10-8 to 7.0 × 10-6 M, with a correlation coefficient of 0.998. Thedetection limit (S/N = 3) was found to be 1.5 × 10-9 M. The modified electrode had beenapplied to the determination of DA in human serum samples with satisfactory results.