1 March 2011 in Expert Systems with Applications
1 June 2019 in IET Power Electronics
Synchronous reluctance motors (SynRMs) are an alternative solution in low‐cost applications due to some advantages in terms of manufacturing simplicity. This study deals with a new design and implementation of a SynRM so as to operate at low‐voltage level produced by solar panels without using any boost‐converter. A 4‐inch of standard frame size is chosen for as a submersible pump motor. Preparing for the optimisation step, the commercial design software, Infolytica is used to create the first base structure of the SynRM. As the first step the dc‐link voltage, rated current, rated speed, winding layout, slots number, number of the rotor barriers and the outer/inner diameters of the stator are determined. In the next step, the base structure is optimised by using a genetic algorithm (GA) developed in Matlab environment. The developed GA script and finite element analysis software are operated together for optimisation of the rotor geometry. A direct torque control algorithm is used to analyse the performance of the designed motor. The designed motor is also manufactured and tested experimentally.
31 May 2008 in Expert Systems with Applications
5 September 2016 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose: The purpose of this paper is to investigate Halbach array effects in surface mounted permanent magnet machine (SMPM) in terms of both self-sensing and torque capabilities. A comparison between a conventional SMPM, which has radially magnetized rotor, and a Halbach machine has been carried out. Design/methodology/approach: The geometric parameters of the two machines have been optimized using genetic algorithm (GA) with looking Pareto. The performance of the machines’ geometry has been calculated by finite element analysis (FEA) software, and two parametric machine models have been realized in Matlab coupled with the FEA and GA toolboxes. Outer volume of the machine, thus copper loss per volume has been kept constant. The Pareto front approach, which simultaneously considers looks two aims, has been used to provide the trade-off between the torque and sensorless performances. Findings: The two machines’ results have been compared separately for each loading condition. According to the results, the superiority of the Halbach machine has been shown in terms of sensorless capability compromising torque performance. Additionally, this paper shows that the self-sensing properties of a SMPM machine should be considered at the design stage of the machine. Originality/value: A Halbach machine design optimization has been presented using Pareto optimal set which provides a trade-off comparison between two aims without using weightings. These are sensorless performance and torque capability. There is no such a work about sensorless capability of the Halbach type SMPM in the literature.
5 January 2015 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose: – The purpose of this paper is to introduce a new design optimization technique for a surface mounted permanent magnet (SMPM) machine to increase sensorless performance at high loadings by compromising with torque capability. Design/methodology/approach: – An SMPM parametric machine model was created and analysed by finite element analysis (FEA) software by means of the Matlab environment. Eight geometric parameters of the machine were optimized using genetic algorithms (GAs). The outer volume of the machine, namely copper loss per volume, was kept constant. In order to prevent sensorless performance loss at high loading, an optimization process was realized using two loading stages: maximum torque with minimum ripple at nominal load and maximum self-sensing capability at twice load. In order to show the effectiveness of the proposed technique, the obtained results were compared with the classical one-stage optimization realized for each loading condition separately. Findings: – With the proposed technique, fairly good performance results of the optimization were obtained when compared with the one-stage optimizations. Using the proposed technique, sensorless performance of the motor was highly increased by compromising torque capability for high loading. Additionally, this paper shows that the self-sensing properties of a SMPM machine should be considered at the design stage of the machine. Originality/value: – In related literature, design optimization studies for the sensorless capability of SMPM motor are very few. By increasing optimization performance, new proposed technique provides to achieve good result at high load for sensorless performance compromising torque capability.