Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the transition of a transmon qubit with an anharmonicity of MHz, we implement gates achieving a leakage error below down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion.
Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device, which allows us to place qubits at least 2 mm apart from each other while maintaining over 50-MHz coupling between the coupler and the qubits. In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings. This leaves space for each qubit to have an individual readout resonator and a Purcell filter, which is needed for fast high-fidelity readout. In addition, simulations show that the large qubit-qubit distance significantly lowers unwanted non-nearest-neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk. Using the proposed flexible and scalable architecture, we demonstrate a controlled- gate with ()% fidelity.
Quantum technologies, such as communication, computing, and sensing, offer vast opportunities for advanced research and development. While an open-source ethos currently exists within some quantum technologies, especially in quantum computer programming, we argue that there are additional advantages in developing open quantum hardware (OQH). Open quantum hardware encompasses open-source software for the control of quantum devices in labs, blueprints, and open-source toolkits for chip design and other hardware components, as well as openly accessible testbeds and facilities that allow cloud-access to a wider scientific community. We provide an overview of current projects in the OQH ecosystem, identify gaps, and make recommendations on how to close them at present. More open quantum hardware would accelerate technology transfer to and growth of the quantum industry and increase accessibility in science.
We propose a promising hybrid quantum system, where a highly excited atom strongly interacts with a superconducting oscillator via the electric field of capacitor. An external electrostatic field is applied to tune the energy spectrum of the atom. The atomic qubit is implemented by two eigenstates near an avoided-level crossing in the dc Stark map of a Rydberg atom. Varying the electrostatic field brings the atomic-qubit transition on or off resonance with respect to the microwave resonator, leading to a strong atom-resonator coupling with an extremely large cooperativity. Like the nonlinearity induced by Josephson junctions in superconducting circuits, the large atom-resonator interface disturbs the harmonic potential of the resonator, resulting in an artificial two-level particle. Different universal two-qubit logic gates can also be performed on our hybrid system within the space where an atomic qubit couples to a single photon with an interaction strength much larger than any relaxation rates, opening the door to the cavity-mediated state transmission.
Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.
In this work, we introduce a superconducting quantum processor architecture that uses a transmission-line resonator to implement effective all-to-all connectivity between six transmon qubits. This architecture can be used as a test bed for algorithms that benefit from high connectivity. We show that the central resonator can be used as a computational element, which offers the flexibility to encode a qubit for quantum computation or to utilize its bosonic modes that further enables quantum simulation of bosonic systems. To operate the quantum processing unit (QPU), we develop and benchmark the qubit-resonator conditional Z gate and the qubit-resonator MOVE operation. The latter allows for transferring a quantum state between one of the peripheral qubits and the computational resonator. We benchmark the QPU performance and achieve a genuinely multiqubit entangled Greenberger-Horne-Zeilinger state over all six qubits with a readout-error mitigated fidelity of F | ψ 〉 GHZ = 0.86 .