The study aims to use waste plastic PET bottles to recover terephthalic acid for preparing copper-1,4-benzenedicarboxylate, which was then utilized as an adsorbent for removal of methylene blue (MB) from aqueous solutions after carefully characterizing by XRD, FTIR, TGA, SEM, and EDX. The optimum conditions were established as pH = 6, 25°C, adsorbent dose of 1 g L−1, contact time of 20 min, and agitation speed of 150 rpm. The adsorption process was spontaneous, exothermic, fitting well to Langmuir isotherm model with the maximum adsorption capacity of 41.01 mg g−1 and more suitable to be described by the pseudo first-order kinetic model. It was indicated that the physical adsorption plays a leading role in the adsorption process. The recycling study was also conducted to confirm the long-term use of the synthesized adsorbent.
7 February 2019 in Toxicological & Environmental Chemistry
A metal-organic framework of iron-doped copper 1,4-benzenedicarboxylate was synthesized and, for the first time, utilized as a heterogeneous photo-Fenton catalyst for degradation of methylene blue dye in aqueous solution under visible light irradiation. The synthesized materials were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The influence factors, kinetics, and stability of the synthesized catalysts were investigated in detail. Iron-doped copper 1,4-benzenedicarboxylate showed higher degradation efficiency than pure copper 1,4-benzenedicarboxylate. An almost complete degradation was achieved within 70 min under visible light irradiation at a solution pH of 6, a catalyst loading of 1 g L−1, a H2O2 dosage of 0.05 mol L−1 and methylene blue concentration of 50 mg L−1. Recycling studies demonstrated that the iron-doped copper 1,4-benzenedicarboxylate is a promising heterogeneous photo-Fenton catalyst for long-term removal of methylene blue dye from industrial wastewater.
28 October 2011 in Russian Journal of Physical Chemistry A
The effect of acid activation on the sorption of clynoptilolyte tufa with respect to phenylalanine is investigated. The treatment of clynoptilolyte tufa with 4.0 M of hydrochloric acid is found to yield a substantial increase in sorption of the aromatic amino acid. Different types of interaction in the acid-activated clynoptilolyte tufa-water-aromatic amino acid are revealed. The effect of pH of the solution of the sorption parameter is demonstrated.
The changes in the structure and physicochemical characteristics of clinoptilolite tuff activated with 4.0 M hydrochloric acid were studied in this work. Using low-temperature adsorption/desorption of nitrogen the specific surface and porosity of clinoptilolite tuff were determined before and after activation with 4.0 M HCl. Acid treatment is found to cause an increase in the specific surface area, as well as the primary and secondary porosity of the sorbent. Selective adsorption of toluene from a mixture with water and thermogravimetric analysis indicates an increase in the hydrophobicity of acid-activated clinoptilolite tuff.
Parameters of the equilibrium sorption of phenylalanine and histidine on clinoptilolite from aqueous solutions containing the individual amino acids and their mixtures were presented. The contribution of exchange and non-exchange components in the adsorption capacity of clinoptilolite was determined. It was found that the interfacial distribution of amino acids is determined by the ratio of CHis / CPhe and manifested in sorption equilibrium characteristics. The maximum degree of extraction of histidine is achieved at the ratio of CHis / CPhe equals to 1: 3.