17 March 2025 in Advanced Science
This study demonstrates the fabrication of high‐strength, lightweight polymer‐derived ceramics (PDCs) using silicon oxycarbide (SiOC)‐precursor formulations with liquid crystal display (LCD) vat photopolymerization (VPP) technology. Complex geometries, such as gyroids and stochastic lattices, are successfully 3D‐printed and evaluated under varying feature thicknesses and pyrolysis temperatures (800 °C and 1200 °C). Photorheology and thermogravimetric analysis (TGA) validated the efficient curing and pyrolysis characteristics of a printable precursor formulation based on vinyl methoxysiloxane homopolymer (VMM‐010), which demonstrated rapid curing, low viscosity, and compatibility with LCD 3D printing, ensuring precise layering and efficient resin removal. Micro‐CT scans confirmed its structural integrity and absence of voids, even in relatively thick components (≈3 mm). The VMM‐based PDC lattices achieved specific compressive strengths up to 9.4 MPa g⁻¹ cm3, a 50‐fold improvement over comparable lattices produced with a high‐porosity SiOC PDC, and exceptional high‐temperature stability, maintaining structural integrity after 2 h at 1500 °C. Compositional analysis revealed lower free carbon content and improved ceramic phase formation, driving the enhanced mechanical and thermal performance of the VMM‐based ceramic. These findings underscore the scalability, reliability, and superior performance of VMM formulations for LCD 3D printing, offering new possibilities for high‐performance ceramic applications in aerospace, automotive, and biomedical industries.
21 February 2025 in RSC Sustainability
This study demonstrates SLA 3D printing of Li-ion battery anodes using recycled solar cell waste, achieving 400 mA h g −1 capacity with 89% retention after 200 cycles. This sustainable approach surpasses graphite anodes and supports circular economy.
12 October 2021 in Fiber and Integrated Optics
This work explains the theoretical and mathematical investigations of the transmission performance of an optical Single Sideband (SSB) modulation technique generated by a Mach Zehnder Modulator (MZM) with a 90° and 120° phase shift using hybrid coupler (Modified SSB) in addition to the Vestigial Sideband technique (VSB). The problem addressed in this paper is the effect of non-linearity of the transmitter system and the chromatic dispersion in single mode fiber due to the presence of second- and higher order harmonics. The non-linearity of the transmitter generates second and higher order harmonics, which affects the system performance leading to reduction in the data rate and increased distortion. The transmission performance of SSB, M-SSB and VSB is evaluated based on the extinction ratio of the MZM, different transmission lengths of the fiber, optical signal modulation index and the receiver sensitivity. A mathematical model has been developed for all the systems representing the modulation techniques till the second order. The baseband modulation consists of an RF signal of frequency 18 GHz and an Orthogonal Frequency Division Multiplexing (OFDM) signal with 4-QAM modulation technique converted to optical signal, using the MZM and transmitted over a SMF of distance of 75 Km. Our results show that the M-SSB technique proves to be more immune toward transmitter nonlinearity and chromatic dispersion as compared to its counterparts. In addition to this, it improves the receiver sensitivity by 6.56 dBm. The results generated by software simulation are in tandem with the mathematical model.