Monolithic two-terminal (2T) perovskite/CuInSe2 (CIS) tandem solar cells (TSCs) combine the promise of an efficient tandem photovoltaic (PV) technology with the simplicity of an all-thin-film device architecture that is compatible with flexible and lightweight PV. In this work, we present the first-ever 2T perovskite/CIS TSC with a power conversion efficiency (PCE) approaching 25% (23.5% certified, area 0.5 cm2). The relatively planar surface profile and narrow band gap (∼1.03 eV) of our CIS bottom cell allow us to exploit the optoelectronic properties and photostability of a low-Br-containing perovskite top cell as revealed by advanced characterization techniques. Current matching was attained by proper tuning of the thickness and bandgap of the perovskite, along with the optimization of an antireflective coating for improved light in-coupling. Our study sets the baseline for fabricating efficient perovskite/CIS TSCs, paving the way for future developments that might push the efficiencies to over 30%.
Mobile ions limit halide perovskite device performance, yet quantifying ionic properties remains challenging. Frequency-domain electrical techniques are restricted to operational devices, and the resulting signals are often dominated by interfacial recombination which obscures ionic contributions. Here, we introduce intensity-modulated photoluminescence spectroscopy (IMPLS) as a fully optical alternative, where the amplitude and phase of the photoluminescence intensity is measured as a function of excitation modulation frequency. IMPLS is demonstrated on a Cs0.07(FA0.83MA0.17)0.93Pb(I0.83Br0.17)3 film. Fitting the data with an optical equivalent circuit model reveals two characteristic lifetimes: τchar = 2.1 ms and 77 s, likely corresponding to defect formation and ionic diffusion, respectively. The diffusion feature is consistent with intensity-modulated photocurrent/photovoltage spectroscopy (IMPS/IMVS) measurements on corresponding full devices. Importantly, IMPLS enables contact-free characterization of slow processes for all perovskite sample types, including films and devices, significantly expanding the techniques available for understanding mobile ions in these materials.
18 October 2025 in ACS Applied Materials & Interfaces
Halide perovskites face intrinsic stability challenges primarily due to light- and bias-induced ion migration. To mitigate ion-mediated degradation on operationally relevant time scales, this work investigates how introducing brief periodic intervals of light and darkness (LD cycling) can stabilize the average efficiency of perovskite films and devices. Systematic photoluminescence (PL) studies reveal that dark intervals on the order of seconds significantly suppress nonradiative recombination and slow degradation. The extent of PL enhancement depends on the duration of the dark time, the material composition, and critically, the sample's age. Remarkably, LD cycling increases PL by more than 7-fold even in aged samples that would otherwise undergo photodarkening under continuous illumination. Moreover, the PL kinetics under LD cycling mirror the corresponding open-circuit voltage dynamics in full solar cells, showing that local emission changes provide a direct measure of device-level behavior. Device measurements similarly show that LD cycling enhances the power conversion efficiency compared to continuous illumination and mitigates deterioration over extended operation. This strategy highlights a potential pathway to dynamically preserve or even improve perovskite performance in future optoelectronic applications.
30 January 2025 in Progress in Photovoltaics: Research and Applications