14 June 2021 in IEEE Transactions on Instrumentation and Measurement
Harmonic drive is the core component of the industrial robot, and its fault diagnosis is crucial to the reliability and performance of the equipment. Most machine learning methods achieve good results based on the assumption of data balance. However, the scarce fault data of harmonic drive is difficult to collect, resulting in various imbalanced health status samples, which has an adverse effect on fault diagnosis. In this article, we propose a data generation method based on generative adversarial networks (GANs) to solve the problem of data imbalance and utilize the multiscale convolutional neural network (MSCNN) to realize the fault diagnosis of the harmonic drive. First, the data collected from three vibration acceleration sensors are preprocessed by fast Fourier transform (FFT) to obtain the frequency spectrum of the vibration signal. Second, multiple GANs were adopted to generate various fault spectrum data and the data selection module (DSM) is elaborately designed to filter and purify these data. Third, the filtered generated data will be combined with the real data to form a balanced dataset, and then the MSCNN is used to achieve multiclassification of the health status of the harmonic drive. Finally, the experiments have been implemented on an industrial robot vibration test bench to validate the effectiveness of our approach. The results have shown the fault multiclassification accuracy as 98.49% under imbalanced fault data conditions, which outperforms that of the other compared methods.
16 September 2020 in IEEE Transactions on Instrumentation and Measurement
Harmonic drive is a key component in industry robot. Its complex design is highly sensitive to the manufacturing and assembly errors. Even a small error could cause excessive vibration jeopardizing the performance of the robot. Moreover, the vibration is dependent on the operation conditions. As a result, it is necessary to carry out a comprehensive test to detect possible manufacturing and assembling faults. This paper presents an intelligent approach that can automatically identify the different health conditions of harmonic drives. First, the acquired data from multiple acceleration sensors are cascaded in sequence after several preprocessing steps. Then, the multiscale convolutional neural network (MSCNN) architecture is used for disposing the inherent multiscale characteristics of the harmonic drive vibration signal, which can simultaneously perform multiscale feature extraction and classification. Finally, a large number of experiments were conducted on a real industrial robot vibration test platform to evaluate our approach. Based on the experiment results, the fault detection classification accuracy is 96.79%, which is higher than the other compared methods. This demonstrates that the presented method is effective for shop floor applications.
10 May 2024 in IEEE Transactions on Industrial Informatics
The existing fault diagnosis of harmonic drives is difficult to deploy vibration sensors, and the diagnosis accuracy is insufficient only using current signal. Therefore, we propose an intelligent fault diagnosis method using a multimodal collaborative meta network (MCMN) with severely missing modality. First, multimodal data of the harmonic drive were collected to analyze. Second, a feature reconstruction network is used to achieve a unified model to handle missing modalities in testing. Besides, the uncertainty assessment is used as a feature regularization network to overcome data bias. Third, the inference of the meta-learning is used to obtain the generated weights, and carried out the joint optimization. Finally, MCMN is optimized by using the approximate lower bound of Monte Carlo. Experimental results show that the accuracy of MCMN is 93.75% in the case of full-modalities training data and the severely missing modalities testing data, which is better than the existing method.
12 July 2012 in Journal of Mechanical Science and Technology
It is known that the human body contains rich chemical energy, part of which is converted to mechanical energy of up to 200W when in motion. Therefore, it is ideal to harvest human body kinetic energy to power mobile electronic devices. This paper presents an energy harvester to unintentionally extract human kinetic energy and directly convert it to electricity, which can serve as a power source for portable electronics. The proposed harvester mainly consists of an eccentric rotor made of permanent magnet, electric steel and coils as stator. The eccentric rotor, as a simple pendulum, acts as the kinetic energy harvester, which can absorb the motion from the human body during walking. With the permanent magnets on the rotor, the moving rotor can produce a changing magnetic field, where electric coils can induce electricity. A torsion spring is also added onto the rotor such that the harvester works even when placed on a horizontal plane where the gravitational acceleration fails. The electromagnetic and kinematical model is built to analyze the performance. Numerical analysis and system optimization are also conducted. Simulation shows that the harvester with 40mm diameter and 50g weight, worn on the wrist, can produce dozens of milliwatts of electricity during normal walking.