9 May 2010 in Nature Photonics
5 November 2020 in Journal of Applied Physics
The past 30 years have seen spectacular progress in the development of techniques for measuring the complete temporal field, and even the complete spatiotemporal field, of ultrashort laser pulses. The challenge has been to measure a pulse without the use of a shorter event or an independent known reference pulse, neither of which is typically available. We begin with autocorrelation, the first such “self-referenced” pulse-measurement method ever proposed, which measures only a rough pulse length, and we describe its limitations. One such limitation is the presence of a somewhat unintuitive “coherent artifact,” which occurs for complicated pulses and also when averaging over a train of pulses whose shapes vary from pulse to pulse. We then describe the most important modern techniques capable of measuring the complete temporal intensity and phase of even complicated ultrashort pulses, as well as their ability (or inability) to measure such unstable pulse trains. A pulse reliably measured with such a device can then be used as a reference pulse in conjunction with another technique, such as spectral interferometry or holography, to measure pulses otherwise unmeasurable by a self-referenced technique. Examples include techniques for measuring low-intensity pulse(s) and for measuring the complete spatiotemporal intensity and phase of arbitrary pulse(s). This Tutorial is limited to well-established, proven methods, but other methods whose description proves instructive will be discussed.
1 March 2006 in Applied Optics
Dispersive multilayer coatings have found widespread use, particularly in the compensation of material dispersion in femtosecond oscillators and amplifiers. Other than prism or grating sequences, only chirped mirrors allow for the compensation of a much more general spectral dependence of the dispersion. The current state of the art in ultrabroadband mirror design for dispersion compensation is reviewed. Approaches to expand the utility of chirped-mirror coatings toward the coverage of an even-wider bandwidth beyond the optical octave are discussed.
4 December 2017 in Journal of the Optical Society of America B
Dispersion scan is a self-referenced measurement technique for ultrashort pulses. Similar to frequency-resolved optical gating, the dispersion scan technique records the dependence of nonlinearly generated spectra as a function of a parameter. For the two mentioned techniques, these parameters are the delay and the dispersion, respectively. While dispersion scan seems to offer a number of potential advantages over other characterization methods, in particular for measuring few-cycle pulses, retrieval of the spectral phase from the measured traces has so far mostly relied on the Nelder–Mead algorithm, which has a tendency to stagnate in a local minimum and may produce ghost satellites in the retrieval of pulses with complex spectra. We evaluate three different strategies to overcome these retrieval problems, namely, regularization, use of a generalized-projections algorithm, and an evolutionary retrieval algorithm. While all these measures are found to improve the precision and convergence of dispersion scan retrieval, differential evolution is found to provide the best performance, enabling the near-perfect retrieval of the phase of complex supercontinuum pulses, even in the presence of strong detection noise and limited phase-matching bandwidth of the nonlinear process.
6 March 2017 in Optics Letters
Attosecond spectroscopy and precision frequency metrology depend on the stabilization of the carrier-envelope phase (CEP) of mode-locked lasers. Unfortunately, the phase of only a few types of lasers can be stabilized to jitters in the few-hundred millirad range. In a comparative experimental study, we analyze a femtosecond Ti:sapphire laser and three mode-locked fiber lasers. We numerically demodulate recorded time series of the free-running carrier-envelope beat note. Our analysis indicates a correlation between amplitude and frequency fluctuations at low Fourier frequencies for essentially all lasers investigated. While this correlation typically rolls off at frequencies beyond 100 kHz, we see clear indications for a broadband coupling mechanism in one of the fiber lasers. We suspect that the observed coupling mechanism acts to transfer intracavity power fluctuations into excess phase noise. This coupling mechanism is related to the mode-locking mechanism employed and not to the gain medium itself. We further verify this hypothesis by numerical simulations, which identify resonances of the saturable absorber mirror as a possible explanation for the coupling mechanism. Finally, we discuss how to avoid a detrimental influence of such resonances.
14 April 2006 in Applied Physics B