2 September 2023 in Chemical Engineering Journal
8 July 2025 in Journal of Materials Chemistry A
The upcycling of spent ternary cathodes has attracted much interest owing to the enhanced lithium storage performance. However, most reports have focused on replenishing active lithium and repairing cracks while ignoring the inevitably formed NiO rock-salt phase on the surface. This rock-salt phase can trigger an unstable electrode/electrolyte interface and continuous capacity decay, especially at high rates or high cut-off voltages. Herein, motivated by the undesirable rock-salt phases on the surface and lattice vacancies in the bulk, an upcycling strategy is rationally designed with simultaneous dual modification of bulk Sb5+-doping into and in situ Li3Ni2SbO6 surface coating onto the spent NCM622 cathode materials, endowing the refreshed NCM cathodes with high capacity retentions of 97.7% and 81.6% after 100 cycles and 300 cycles, respectively, at a high rate of 5 C, high cut-off voltage of 4.6 V, and high loading exceeding 20 mg cm−2. Such remarkable stability is attributed to the synergistic effect of the broadened lattice and robust Sb–O bonds with high oxygen vacancy formation energy from bulk Sb-doping and physical barrier from electrolytic corrosion and promoted charge transfer from the in situ formed Li3Ni2SbO6. More encouragingly, this unique synchronous upcycling strategy could be extended to various systems, such as Nb-based and Te-based bulk/surface upcycling, as well as for NCM111 and Ni83 systems. Thus, this work paves a new pathway to upcycle degraded NCM into high-performance ones with prolonged high-rate stability.
4 December 2025 in Advanced Functional Materials
2 April 2025 in Journal of Materials Chemistry A
Assisted by CaO powder, the regenerated cathodes are successfully achieved through the removal of CaF 2 and deliver a considerable capacity and excellent rate performance.
13 March 2026 in Advanced Energy Materials
Captured by economic and environmental values, direct regeneration of spent NCM (SNCM) has been regarded as a next‐generation recycling strategy. To meet the demand of commercial applications, solid‐state Li‐replenishing methods have been explored, but the as‐regenerated samples still suffer from uneven Li distribution and inferior crystalline phase. Herein, through controlling oxygen vacancies (OVs) concentrations, SNCM is successfully upcycled into high‐performance NCM, displaying uniform Li distribution and significant phase traits. And, the structural strain is obviously reduced; meanwhile, the conductivity is increased by ∼20%. Moreover, its Li‐ion diffusion energy barrier is reduced from 0.43 to 0.29 eV, and the lowered formation energy brings about improvements in lattice structure stability. The as‐optimized samples exhibited high‐capacity retention of 91.3% at 1.0C and 76.0% at 5.0C, 94.1% capacity retention at 1.0C for full‐cells. Supported by kinetics analysis and ex situ measurements, the charge transfer is accelerated, and the structural stability is guaranteed with low internal strain distribution and local element balance during cycling. More inspiringly, this upcycling method could be extended to spent NCM613, Ni65, and NCM811. Given this, this work is expected to shed light on the controlling mechanism of OVs in solid‐state reaction, whilst providing upcycling strategies for SNCM.
5 October 2025 in Advanced Functional Materials