16 December 2022 in Advanced Energy and Sustainability Research
The stress of GaInP/GaAs/InGaAs triple‐junction (3J) solar cells with different thicknesses of Cu thin‐film substrates is analyzed. X‐ray diffractometer and metallographic examination show that the unstable as‐deposited Cu film undergoes room‐temperature self‐annealing, which results in grain growth and changes the internal stress of the Cu film over time. A suitable Cu thickness (18 μm) for 3J solar cells is obtained, whose internal stress can offset the stress caused by the epitaxial mismatch. The flexible 3J solar cell with 18 μm Cu film has the lowest curvature of 8.24 m−1 under the combined effect of thermal stress and lattice mismatch stress. The photovoltaic conversion efficiency reaches 35.02% with the open‐circuit voltage of 3.03 V under AM1.5G spectrum. Cu films with a thickness of 14–28 μm have little effect on the optoelectronic properties of the final device. Reducing the curvature of lattice‐mismatched GaInP/GaAs/InGaAs solar cell devices is beneficial for realizing large‐scale flexible solar cell modules.
1 April 2024 in Applied Optics
The inverted metamorphic multi-junction solar cell is anticipated to be widely applied in stratospheric flight because of its exceptional properties of flexibility and light weight. We propose an ipsilateral welding technology based on Ti/Au electrodes to simplify the fabrication process of GaInP/GaAs/InGaAs solar cells and encapsulate large-sized flexible solar cells. After annealing at 200°C for 2 h, the Ti/Au electrode achieved a low specific contact resistivity of 2.9×10−7Ω⋅cm2. The performance of the ohmic contact remains stable after the thermal cycling tests. The Ti/Au electrode can require less heat input for welding to reduce the risk of microcrack formation of the solar cells. By employment of this electrode, a 24cm2 solar cell achieved a conversion efficiency of 34.74%. A flexible solar cell module with an efficiency of 32.82% under AM 1.5G illumination was obtained by the ipsilateral electrode welding technology.
23 September 2022 in Applied Optics
Porous ZnO nanosheets (ZnO NSs) may play an important role in self-powered UV photodetectors due to their excellent properties, and their porosity feature affects the photoresponse performance greatly. Porous ZnO NSs were prepared by the hydrothermal method followed with a one-step annealing treatment. The effects of the annealing temperature on the microstructure and photoresponse of porous ZnO NSs and n-ZnO NSs/p-PEDOT:PSS self-powered UV photodetectors were investigated. The results show that the pore density and size of ZnO NSs can be tuned by changing the annealing temperature. At an optimum annealing temperature of 450°C, ZnO NSs exhibit greater absorption capacity for the suitable pore density and size. Meanwhile, more crystal defects due to surface contractile properties increase the number of photogenerated carriers. On this basis, the n-ZnO NSs/p-PEDOT:PSS photodetector presents a larger photocurrent and fast photodetection speed without external bias voltage, indicating the self-powered performance. The higher light absorption and large number of electron-hole pairs resulting from dense pores and surface defects in porous ZnO NSs might account for the enhanced performances.
2 July 2025 in Optical Materials Express
III-V multijunction solar cells achieved high efficiency by stacking subcells with different bandgaps in series to fully absorb sunlights. We report a highly efficient GaInP/GaAs(QWs)/ triple-junction flexible solar cell, which integrates strain-balanced InGaAs/GaAsP quantum wells (QWs) in the intermediate subunit to overcome the bandgap mismatch of it. By introducing 40 periods of QWs in its intrinsic region, the absorption edge of this GaAs subcell is effectively extended to 930 nm, the corresponding effective bandgap is narrowed to 1.34-1.35 eV, and consequently the current matching with GaInP and InGaAs subcells is enhanced under the AM1.5G spectra. The 8 cm2 flexible solar cell, epitaxially grown by metal-organic chemical vapor deposition (MOCVD) and transferred onto a 20 um Cu flexible substrate, achieved a conversion efficiency of 35.96% (AM1.5G). This flexible and efficient solar cell offers scalability for both aerospace and terrestrial applications.
13 May 2024 in Applied Optics
This erratum corrects an error in Fig. 1 of the original paper, Appl. Opt. 63, 2815 (2024)APOPAI 0003-6935 10.1364/AO.518102 .
11 May 2026 in Applied Physics Letters
To achieve high efficiency in five-junction solar cells under a space spectrum, it is essential to precisely adjust the subcells' bandgap to achieve optimal spectral matching. In this work, strain-balanced quantum wells (QWs) are employed to fine-tune the bandgap combination of inverted metamorphic (IMM) four-junction solar cells, which are based on the top four junctions of IMM five-junction solar cells. The 60-period QWs expand the absorption spectrum of the current-limited GaAs subcell to longer wavelengths, resulting in an external quantum efficiency of 48%. The short-circuit current density of the GaAs subcell increased from 10.283 to 11.171 mA/cm2. Consequently, the maximum current mismatch of the four-junction solar cells decreased from 12.2% to 4.6%. We have successfully prepared a flexible four-junction solar cell with a photoelectric conversion efficiency of 30.14% (8 cm2, AM0 spectrum), an open-circuit voltage of 4.347 V, and a retention rate of bending test performance that is over 99%. Based on the performance parameters of the four-junction QW cells, we estimate that the efficiency of the flexible five-junction solar cells prepared on this basis will be further improved.