A planar trigger switch constituting of three electrodes was designed and fabricated using low temperature co-fired ceramic, and characterized under an atmospheric pressure. The results showed that when the operating voltage ranges between 77.2% and 86.8% of its self-breakdown voltage, the inductance of the switch was lower than that of commercial spark gap switch by approximately 60 nH, the current rising time was shortened by nearly 1/2, and the peak current increased by about 30%. The peak current and rising edge were 4000 A and 146 ns at 0.22 μF/2.0 kV, respectively, which was in agreement with simulation values well. Subsequently, the switch was devised to be in-situ integrated with an exploding foil initiator together. The electrical characterizations were performed on the chip, obtaining the switch’s rapid turn-on time of 29 ns and a large current density of 1.08×108 A˙cm-2 at 0.22 μF/2.25 kV. Furthermore, photon Doppler velocimetry was exploited to capture the detailed trajectory of a 50 μm-thick flyer with an extracted terminal velocity of 2200 m/s. Finally, boron-potassium nitrate pellets and hexanitrostilbene pellets were used to successfully verify the practicability of the chip in the ignition and detonation of explosives.