26 October 2020 in Nature Energy
4 October 2018 in Nature Communications
The low-cost room-temperature sodium-sulfur battery system is arousing extensive interest owing to its promise for large-scale applications. Although significant efforts have been made, resolving low sulfur reaction activity and severe polysulfide dissolution remains challenging. Here, a sulfur host comprised of atomic cobalt-decorated hollow carbon nanospheres is synthesized to enhance sulfur reactivity and to electrocatalytically reduce polysulfide into the final product, sodium sulfide. The constructed sulfur cathode delivers an initial reversible capacity of 1081 mA h g−1 with 64.7% sulfur utilization rate; significantly, the cell retained a high reversible capacity of 508 mA h g−1 at 100 mA g−1 after 600 cycles. An excellent rate capability is achieved with an average capacity of 220.3 mA h g−1 at the high current density of 5 A g−1. Moreover, the electrocatalytic effects of atomic cobalt are clearly evidenced by operando Raman spectroscopy, synchrotron X-ray diffraction, and density functional theory.
24 July 2024 in Nature Communications
In pursuing cheap and effective oxygen reduction catalysts, the Fe/N/C system emerges as a promising candidate. Nevertheless, the structural transformations of starting materials into Fe- and N-doped carbon catalysts remains poorly characterized under pyrolytic conditions. Here, we explore the evolution of Fe species and track the formation of Fe–N 4 site development by employing diverse in-situ diagnostic techniques. In-situ heating microscopy reveals the initial formation of FeO x nanoparticles and subsequent internal migration within the carbon matrix, which stops once FeO x is fully reduced. The migration and decomposition of nanoparticles then leads to carbon layer reconstruction. Experimental and theoretical analysis reveals size-dependent behavior of FeO x where nanoparticles below 7 nm readily release Fe atoms to form Fe–N 4 while nanoparticles with sizes >10 nm tend to coalesce and impede Fe–N 4 site formation. The work visualizes the pyrolysis process of Fe/N/C materials, providing theoretical guidance for the rational design of catalysts.
31 December 2020 in Advanced Energy and Sustainability Research
KKKonstantin Konstantinov
All‐solid‐state sodium batteries (ASSBs) are regarded as the next generation of sustainable energy storage systems due to the advantages of abundant sodium resources, and their exceptional and high energy density. Nevertheless, there are still grand challenges to realize their practical applications, such as the limited types of solid‐state electrolytes (SEs), low ionic conductivity of SEs, high charge‐transfer impedance, interfacial issues, and Na dendrite growth. Herein, the recent progress and challenges of various SEs for ASSBs are summarized, including solid polymer electrolytes, inorganic solid electrolytes (including oxides, sulfides, and boron hydrides), and their combinations. Furthermore, recent reports on various cathodes materials and corresponding cathode/SE interfacial issues are comprehensively reviewed. Current trends and future perspectives on sodium metal anodes are discussed in detail with an emphasis on the anode interface protection and innovative SEs with good Na compatibility. Finally, future opportunities for the development of ASSBs are outlined.
3 June 2021 in Advanced Functional Materials
22 January 2024 in Advanced Science
Sodium‐ion batteries (SIBs) and sodium‐ion capacitors (SICs) are promising candidates for cost‐effective and large‐scale energy storage devices. However, sluggish kinetics and low capacity of traditional anode materials inhibit their practical applications. Herein, a novel design featuring a layer‐expanded MoS2 is presented that dual‐reinforced by hollow N, P‐codoped carbon as the inner supporter and surface groups abundant MXene as the outer supporter, resulting in a cross‐linked robust composite (NPC@MoS2/MXene). The hollow N, P‐codoped carbon effectively prevents agglomeration of MoS2 layers and facilitates shorter distances between the electrolyte and electrode. The conductive MXene outer surface envelops the NPC@MoS2 units inside, creating interconnected channels that enable efficient charge transfer and diffusion, ensuring rapid kinetics and enhanced electrode utilization. It exhibits a high reversible capacity of 453 mAh g−1, remarkable cycling stability, and exceptional rate capability with 54% capacity retention when the current density increases from 100 to 5000 mA g−1 toward SIBs. The kinetic mechanism studies reveal that the NPC@MoS2/MXene demonstrates a pseudocapacitance dominated hybrid sodiation/desodiation process. Coupled with active carbon (AC), the NPC@MoS2/MXene//AC SICs achieve both high energy density of 136 Wh kg−1 at 254 W kg−1 and high‐power density of 5940 W kg−1 at 27 Wh g−1, maintaining excellent stability.