25 December 2023 in IEEE Transactions on Industrial Electronics
This article proposes a comprehensive approach to achieve high-precision modeling, high bandwidth, and robust control for the voice coil actuator fast steering mirror (VCA-FSM). This approach includes the Hankel matrix identification method, $H_{\infty }$ sensitivity control, disturbance observer (DOB), and zero phase error tracking control (ZPETC) algorithms. The superiority and practicality of the proposed control techniques are discussed by comparing control methods, such as $H_{\infty }$ , sliding mode control (SMC), linear-quadratic-regulator (LQR), and proportional-integral-derivative (PID) through experiments. Especially, this proposed method serves as a good guide for controller designs of other servo mechanisms.
27 November 2024 in IEEE Transactions on Automatic Control
This paper proposes a novel multi-objective control framework for linear time-invariant systems in which performance and robustness can be achieved in a complementary way instead of a trade-off. In particular, a state-space solution is first established for a new stabilizing control structure consisting of two independently designed controllers coordinated with a Youla-type operator ${\bm Q}$ . It is then shown by performance analysis that these two independently designed controllers operate in a naturally complementary way for a tracking control system, due to the coordination function of ${\bm Q}$ driven by the residual signal of a Luenberger observer. Moreover, it is pointed out that ${\bm Q}$ could be further optimized with an additional gain factor to achieve improved performance, through a data-driven methodology for a measured cost function.
13 August 2025 in IEEE Transactions on Instrumentation and Measurement
This article proposes an enhanced disturbance observer (DOB) design method to address the high-bandwidth control challenges of flexible fast steering mirror (FSM) systems. FSMs rapidly adjust mirror orientation through precision control systems, enabling them to meet the dynamic tracking requirements of various high-precision optical applications. Due to the stringent precision demands of optical systems, FSMs are susceptible to external disturbances, sensor measurement noise, and parameter variations. DOB is widely employed in motion control systems to estimate and compensate for these disturbances. However, existing DOB design methods often rely on oversimplified models, treating dynamic characteristics such as flexible resonance as model uncertainties, which limits their performance in flexible systems. Through a comprehensive analysis, this article demonstrates that in flexible resonant systems, the disturbance estimation bandwidth of the existing DOB is frequently constrained by robust stability requirements, leading to suboptimal performance. With the increasing demands on the control bandwidth of FSMs driven by modern technological advancements, model mismatches arising from high-frequency unmodeled dynamics have become a critical bottleneck. Existing DOB is unable to effectively address model mismatches in the high-frequency range of flexible systems. This article proposes an enhanced DOB design method based on the $H_{\infty } $ control framework and Hankel matrix system identification, which simultaneously satisfies multiple performance indicators. By precisely selecting the nominal model and estimating uncertainties, the existing DOB design method is optimized. Experimental results demonstrate that the proposed enhanced DOB effectively suppresses external disturbances and model mismatches, significantly improving the system’s disturbance rejection performance compared to existing methods.