In this work, we present a systematic study on the influence of Cu2+ ion concentration in the impregnation solution on the morphology, structure, optical, semiconducting, and photoelectrochemical properties of anodic CuOx-TiO2 materials. Studied materials were prepared by immersion in solutions with different concentrations of (CH3COO)2Cu and subjected to air-annealing at 400 °C, 500 °C, or 600 °C for 2 h. The complex characterization of all studied samples was performed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), reflectance measurements, Mott–Schottky analyses, and photocurrent measurements. It was found that band gap engineering based on coupling CuO with TiO2 (Eg~3.3 eV) is an effective strategy to increase the absorption in visible light due to band gap narrowing (CuOx-TiO2 materials had Eg~2.4 eV). Although the photoactivity of CuO-TiO2 materials decreased in the UV range due to the deposition of CuO on the TiO2 surface, in the Vis range increased up to 600 nm at the same time.
A simple two-step electrochemical method for the fabrication of a new type of hierarchical Sn/SnOx micro/nanostructures is proposed for the very first time. Firstly, porous metallic Sn foams are grown on Sn foil via hydrogen bubble-assisted electrodeposition from an acidulated tin chloride electrolyte. As-obtained metallic foams consist of randomly distributed dendrites grown uniformly on the entire metal surface. The estimated value of pore diameter near the surface is ~35 µm, while voids with a diameter of ~15 µm appear in a deeper part of the deposit. Secondly, a layer of amorphous nanoporous tin oxide (with a pore diameter of ~60 nm) is generated on the metal surface by its anodic oxidation in an alkaline electrolyte (1 M NaOH) at the potential of 4 V for various durations. It is confirmed that if only optimal conditions are applied, the dendritic morphology of the metal foam does not change significantly, and an open-porous structure is still preserved after anodization. Such kinds of hierarchical nanoporous Sn/SnOx systems are superhydrophilic, contrary to those obtained by thermal oxidation of metal foams which are hydrophobic. Finally, the photoelectrochemical activity of the nanostructured metal/metal oxide electrodes is also presented.