Piezoelectric actuator is one of the most versatile types of smart actuators, extensively used in different industrial applications like robotics, microelectromechanical systems, micro-assembly, biological cell handling, self-assembly, and optical component handling in photonics. By applying potential to a piezoelectric actuator, it can produce micro level deflection with large force generation, very fast response, and long-term actuation as compared to other actuators. The design and analysis of the bimorph piezoelectric cantilever using proportional–integral controller are carried out where the bimorph piezoelectric actuator is used as an active actuator for providing the dexterous behavior during robotic assembly. Characterization of bimorph piezoelectric actuator carried out by controlling voltage signal provides steady-state behavior which is verified by conducting experiments. A prototype of micro gripper is also developed which shows the potential of handling small lightweight objects for robotic assembly.
In the present work, sulfonated graphene oxide and sulfonated poly(1,4-phenylene ether-ether-sulfone) were blended with polyvinylidene fluoride to create a novel ionic polymer–metal composite actuator with enhanced performance. An ionic polymer–metal composite membrane in the protonated form was prepared by casting a composite blend of sulfonated poly(1,4-phenylene ether-ether-sulfone), polyvinylidene fluoride and sulfonated graphene oxide onto a plating of platinum metal as the electrode. The degree of sulfonation of poly(1,4-phenylene ether-ether-sulfone) was characterized using ion-exchange capacity measurements. Energy dispersive X-ray and transmittance electron microscopy analyses were carried out to analyze the chemical composition and detailed structure. Deposition of the platinum electrode and the surface morphology of the proposed ionic polymer–metal composite actuator were assessed using scanning electron microscopy analysis. The electrical properties were measured using cyclic voltammetry, linear sweep voltammetry and proton conductivity. These measurements confirmed the better actuation performance of the fabricated ionic polymer–metal composite actuator compared to other expensive ionic polymer-based actuators, in terms of its high ion-exchange capacity, good proton conductivity, high current density and large bending deflection. The robust, flexible and mechanically strong membrane actuator, fabricated via the synergistic combination of sulfonated poly(1,4-phenylene ether-ether-sulfone), polyvinylidene fluoride and sulfonated graphene oxide, has considerable potential as an actuator material for robotic, bio-mimetic and other applications.