The NASICON-type lithium aluminum titanium phosphate (LATP) solid-state electrolyte is considered as a promising candidate for next-generation lithium metal batteries with high energy density. However, the instability of LATP in the presence of Li metal and its poor contact with the electrodes hinder its practical application. Here, a novel protective-layer (PL) consisting of a PVDF-HFP polymer matrix and LiF ceramic particles was developed. The proposed layer provides a suitable interface between LATP and the electrodes, prevents the reduction of LATP by Li metal, and suppresses the growth of Li dendrites. The excellent performance of the PL|LATP|PL structure as a ceramic-polymer composite electrolyte (CPCE) was demonstrated by Li|CPCE|Li symmetric cell plating/stripping for 1000 hours at 0.5 mA cm−2 without a short circuit. In addition, the assembled LiFePO4|CPCE|Li full-cell was tested at two different C-rates of 0.2C and 1C. The cell cycled at 0.2C was durable and stable for about eight months and retained 86.4% of the initial capacity of 135.6 mA h g−1, while the other cell cycled at 1C had desirable cycling performance for 2000 cycles with little capacity degradation of about 12.5%. In this study, an efficient and robust composite electrolyte was proposed for the development of solid-state Li-metal batteries with high stability, long lifetime, and high power density.
Here, we report 3D hierarchical SnO 2 nanowire (NW) core-amorphous silicon shell on free-standing carbon nanotube paper (SnO 2 @a-Si/CNT paper) as an effective anode for flexible lithium-ion battery (LIB) application. This binder-free electrode exhibits a high initial discharge capacity of 3020 mAh g −1 with a large reversible charge capacity of 1250 mAh g −1 at a current density of 250 mA g −1 . Compared to other SnO 2 NW or its core–shell nanostructured anodes, the fabricated SnO 2 @a-Si/CNT structure demonstrates an outstanding performance with high mass loading (∼5.9 mg cm −2 ), high areal capacity (∼5.2 mAh cm −2 ), and large volumetric capacity (∼1750 mAh cm −3 ) after 25 cycles. Due to the incorporation of CNT paper as the current collector, the weight and thickness of the total electrode is effectively reduced with respect to the conventional LIB anodes. The fabricated electrode has a total thickness of only 30 μ m and considering the total weight of the electrode (active mass + current collector), an initial discharge/charge capacity of 2460/1018 mAh g −1 is obtained. Hence, this thin, lightweight and highly flexible structure is proposed as an excellent candidate for high-performance LIB anode materials, especially in flexible electronics.
In this study, a high-capacity freestanding supercapacitor electrode was developed through electrospinning of a Ti3C2Tx MXene/Polyaniline (PANI)/Polyvinylidene fluoride (PVDF) composite. MXene/PANI composite was achieved through a facile synthesis in which Ti3C2Tx was mixed with PANI Emeraldine salt in N-Methyl-2-Pyrrolidone (NMP) solution using magnetic stirring. PVDF was added to the composite as a flexible binder to facilitate the electrospinning and produce a freestanding electrode. The specific capacitance of the freestanding MXene/PANI/PVDF electrode is 740 Fg-1 at a scan rate of 2 mVs−1, and 895 Fg-1 at a charge-discharge current density of 0.5 Ag-1, which was significantly higher than the specific capacitance of MXene (67 Fg-1) and PANI (54 Fg-1) electrospun electrodes.