Distorted thermal properties: Thermoelectric devices can convert waste heat into electricity, providing one path for improving energy efficiency. Jiang et al. leveraged entropy engineering to synthesize a single-phase high-entropy alloy with attractive thermoelectric properties. By increasing the number of elements in the alloy, the resulting disorder helps to stabilize against breakdown into multiple phases. The disordered and distorted crystal lattice suppresses thermal transport while maintaining the electrical properties, which boosts the heat-conversion efficiency of the material. Science , this issue p. 830
18 February 2019 in Journal of Materials Chemistry A
Both p- and n-type PbTe based materials exhibit excellent thermoelectric properties. However, their mechanical properties are relatively poor compared to those of state-of-the-art thermoelectric materials. In this work, we try to obtain a balance between the strong mechanical properties and high thermoelectric properties of n-type PbTe–3% Sb materials by alloying with PbS. The results indicate that the elastic moduli remain almost unchanged, while the microhardness increases by 62% from a reference value of 54.2 kg mm−2 to approximately 88 kg mm−2 after alloying with PbS (<15%) at room temperature, which is comparable to or even higher than those of common thermoelectric materials. Such a great enhancement of microhardness costs only 7.4% reduction of the dimensionless figure of merit (ZT). A high ZT value of ∼1.5 at 823 K is still maintained. Achieving this fine balance between strong mechanical properties and high thermoelectric properties is crucial to the practical applications of PbTe materials in the electricity generation field.
23 November 2018 in Journal of Materials Chemistry A
Tin sulfide (SnS) is a promising thermoelectric material with advantages of non-toxicity, abundant resources and low cost of its components. However, its figure of merit (ZT) is lower than that of its analogue SnSe, which was recently revealed to have an unprecedentedly high ZT value. Here, we demonstrate the differences of electronic structures between SnS and SnSe by combining angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT). Additionally, by n-type doping with Sb or Bi, our findings reveal novel resonant states near the bottom of the SnS conduction band and a considerable increase of the electron delocalization along the out-of-plane direction. Effectively, Boltzmann transport calculations show that controlled doping with Sb or Bi results in an effective increase of the Seebeck coefficient as well as a remarkably improved normalized electrical conductivity. Thus, together with the lower thermal conductivity along the out-of-plane direction due to the interface scattering from the SnS layered structure, an improved thermoelectric performance may be realized along the out-of-plane direction. These results pave the way towards new opportunities for developing high-performance thermoelectric materials based on electronic structure tuning by atomically controlled n-type doping.
The superior performance of p-type PbTe has generated excitement toward discovering an n-type PbTe recipe to meet the manufacturing requirements for thermoelectric devices. PbI2 is a well-known dopant for n-type PbTe alloys fabrication. For the halogen family, the sintering process involves a common densifying strategy used to reduce the lattice thermal conductivity, which unfortunately causes strong deviations from nominal composition. Thus, to precisely determine the effects of iodine on PbTe’s electrical properties, PbI2-doped ingots were fabricated and characterized in this work. We found that the ingot samples exhibited high electrical conductivity, high power factors, and low lattice thermal conductivity when x equaled 0.004 and 0.005, especially at low temperatures, which was comparable with previous reports.
29 August 2020 in ACS Applied Electronic Materials