The contribution of this work is to deploy a measurement test workbench to analyze the battery consumption of a mobile phone considering both the 5G Standalone (SA) and 5G Non-Standalone (NSA) mobile networks. Therefore, real-time experimentations were done to evaluate accurately the battery consumption when both Voice over Long-Term Evolution (5G VoLTE) and Voice over New Radio (VoNR) voice calls over IP Multimedia Subsystem (IMS) are made. The configuration setup considers the usage of a high-tech Device Under Test (DUT), 5G Test Stations and a Power Monitor Tool (PMT) to precisely evaluate the battery consumption levels, as in [1].
With the widespread deployment of 5G, understanding its energy impact is crucial. This work evaluates the energy efficiency and Quality of Service (QoS) performance of 5G networks, comparing Non-Standalone (NSA) and Standalone (SA) architectures. We investigated the current consumption and QoS within 5G mobile networks, leveraging the IP Multimedia Subsystem (IMS) for Voice over New Radio (VoNR) and 5G Voice over Long-Term-Evolution using Dual-Connectivity feature (5G VoLTE). The analysis considers key QoS metrics: Mean Opinion Score (MOS), delay, and jitter, across all the communication paths from User Equipment (UE) to the 5G network and IMS core. Our results demonstrate that 5G NSA networks exhibit higher energy consumption compared to 5G SA deployments. Furthermore, we observed a correlation between energy behavior and QoS performance. Specifically, higher energy consumption in NSA networks and 5G VoLTE was associated with measurable impacts on MOS, delay, and jitter. These findings highlight the potential for SA deployments and VoNR to offer improved QoS and greater energy efficiency. Therefore, this study provides valuable insights for mobile network operators seeking to optimize resource allocation and reduce operational costs while maintaining a high-quality user experience in 5G networks.
12 January 2026 in IEEE Latin America Transactions
When evaluating battery consumption in mobile devices in the fifth-generation (5G) network, it is crucial to consider the display technology used, as different technologies consume varying amounts of energy. Liquid Crystal Display (LCD) and Dynamic Active Matrix Organic Light-Emitting Diode (AMOLED) are two prevalent display technologies. LCD is an older technology that remains widely used due to its affordability and widespread availability. On the other hand, Dynamic AMOLED is a more advanced display technology in modern smartphones. Typing on a keyboard, swiping through screens, and using voice commands consume different amounts of power. This paper aims to analyze the current consumption of display technologies, in different baseline scenarios, and text input methods. A comparative analysis was conducted between smartphones equipped with LCD and Dynamic AMOLED displays. The results demonstrated that Dynamic AMOLED technology consistently saved energy, achieving reductions of up to approximately 40% in specific modes such as standby or reading. In contrast, PLS LCD has around 30% higher average current consumption than Dynamic AMOLED. Dynamic AMOLED offers notable advantages in energy savings under specific modes, understanding the nuances between display technologies and input modalities helps users and manufacturers of 5G mobile devices make informed decisions about smartphone selection and usage patterns.
1 January 2024 in Journal of Communication and Information Systems
This paper assesses the network performance in terms of Quality of Service (QoS) for the enhanced Mobile Broadband (eMBB) slicing of a private Stand-Alone (SA) network and a base station, identified as Next-Generation Node B (gNB), which is operating at 3.75GHz and using a Software Defined Radio (SDR) device. The contributions of this work are the evaluation of the computational resource allocation of a private 5G SA and the comparison of the QoS performance of the private SA network with a controlled laboratory testbed and a simulation tool, which is known as UERANSIM (User Equipment and Radio Access Network). Additionally, open-source monitoring systems were used in order to collect memory and CPU usage of the network during the experimentation. For the deployment of the SDR 5G SA gNB, the Universal Radio Software Peripheral (USRP) version B210 equipment was utilized. The results also consider the evaluation of QoS metrics i.e. throughput, jitter, round trip time and propagation delay to assess the performance of the private SDR 5G SA network.
Due to network capacity and coverage demands of existing 5G and Beyond 5G networks, Aerial Base Stations (ABS) based on Unmanned Aerial Vehicles (UAV) have been highlighted as a key strategy to expand terrestrial network and assist mobile users. Nevertheless, ABS based on UAV (UAV-BS) are resource constrained in comparison to terrestrial base stations, which implies that resource management procedures are required to efficient UAV-BS operation. In this respect, this work proposes a clustering-based user assignment solution for user to UAV-based ABS, employing a reallocation approach for avoiding connection denial, evaluating the average of allocated users and throughput.
In the classic energy detection (ED) spectrum sensing method for application in cognitive radio the received signals are time windowed in the time domain. This procedure has the adverse effect of smearing the frequency spectrum of the signal. An alternative is to use the time-frequency signal analysis and processing (TFSAP) representation method considering the Cognitive Radio (CR) scenario. The purpose of this work is to evaluate the performance of the Smoothed Pseudo Wigner-Ville Distribution (SPWVD) energy detection method through computational simulations and to compare the results with those obtained with the classic ED algorithm considering both single detection and cooperative spectrum sensing (CSS).