An approach to characterizing the microwave performance of an electro-optic Mach-Zehnder modulator (MZM) is proposed based on photonic down-conversion sampling. Through low-speed sampling, the magnitude response of the MZM at the input microwave frequency is transferred to the duplicate component in the first Nyquist frequency range, and can be measured via low-frequency detection and spectrum analysis. A proof-of-concept experiment is carried out to demonstrate the feasibility of the proposed method, where magnitude-frequency response and half-wave voltage versus frequency of a commercial MZM in the frequency range of 0-40 GHz have been accurately measured under a sampling rate of 96.9 MS/s. Both simulation and experimental results indicate that the proposed method can be implemented without any extra calibration.
The influence of the residual pulse chirp and the spectrum shape from a cavity-less optical pulse source on the sampling performance is theoretically analyzed. According to the theoretical analysis, an optimization method for enlarging the operation bandwidth of a photonic sampling system based on a cavity-less ultra-short pulse source is proposed and experimentally demonstrated. Through biasing the Mach-Zehnder modulator in the cavity-less optical pulse source below its quadrature point, the output spectrum flatness can be greatly improved, which is beneficial for optimizing the photonic sampling frequency response introduced by the ultrashort optical pulse train. In the experiment, the 3-dB bandwidth of the photonic sampling frequency response is increased from less than 10 GHz to more than 35 GHz by using the proposed method without sacrificing the output signal-to-noise ratio.
A novel single-shot photonic time-stretch digitizer scheme is proposed based on complementary parallel single-sideband modulation architecture. Successive digital signal processing, including linearization operation and phase compensation, is employed to improve the performance. Both theoretical analysis and simulation results show that the proposed scheme can simultaneously solve the three vital problems in the single-shot photonic time-stretch digitizers, i.e., removal of the dynamic pulse envelope variation and the dispersion-induced penalty, and suppression of the modulation-induced distortion. Hence, the proposed single-shot photonic time-stretch digitizer can overcome the dispersion-induced bandwidth limitation and realize linearization performance.
An approach to retrieving intrinsic phase response of optical filters from magnitude response only measurement is proposed and demonstrated. Phase retrieval is based on the fact that the intrinsic phase response of an optical filter with a minimum phase response has a unique relationship with its magnitude response. A phase retrieval algorithm based on fast Fourier transform is proposed. In the experiment, the intrinsic phase response of notch in the reflection spectrum of a phase-shifted fiber Bragg grating is successfully retrieved from the measured magnitude response, which is free of the influence of fiber pigtail in the measurement setup.