18 March 2014 in IEEE Transactions on Magnetics
A new paradigm in energy-assisted magnetic recording, acoustically assisted magnetic recording (AAMR), is investigated. In this approach, a surface acoustic wave (SAW) is applied to a magnetostrictive recording medium to temporarily lower its coercivity below the write field. Akin to other energy-assisted recording technologies, AAMR provides a strategy to enable writing on high-coercivity media required for thermal stability in high-density disk drives. Using a contact recording tester, it is demonstrated that the write current needed to record data on a galfenol film is reduced in the presence of SAWs. Further, it is shown that standing and focused acoustic waves can, respectively, be used to lower the coercivity in selected regions on the medium.
18 February 2025 in Journal of Applied Physics
This study investigates the parametric pumping of coherent forward volume spin waves using traveling surface acoustic waves in thin-film yttrium iron garnet. Theoretical analysis, micromagnetic modeling, and experimental validation of the nonlinear three-wave mixing interaction are presented. The energy and momentum imparted by the acoustic pump enable frequency translation and angular deflection of the idler spin waves generated, providing a mechanism for the spectral and spatial separation of signals in magnonic devices. Experimental results demonstrate bilinear parametric interactions, frequency conversion, and angular separation of spin waves under degenerate and non-degenerate conditions and provide evidence of the possibility of parametric amplification of signal spin waves below the instability threshold for generation from the thermal background. The results align qualitatively with theoretical predictions and micromagnetic simulations and lay a path toward developing magnonic signal processing and computing devices utilizing acoustic parametric pumping of spin waves.
7 November 2017 in IEEE Magnetics Letters
Existing metrology tools for magnetic nanoparticles cannot generate magnetic fields of the necessary high strength at high frequency to determine particle saturation and coercivity at conditions representative of their use, for example, in composite inductor cores, medical imaging, and hyperthermia treatments for cancer. To address this measurement need, this letter presents the design of a high-field and high-frequency hysteresis loop tracer capable of 0.16 T at 46.4 kHz. Hysteresis loops of commercial and custom iron oxide nanoparticles in varying sizes are measured and compared to typical vibrating sample magnetometer results in demonstration of the insight into nanoparticle behavior enabled by the new capabilities.
28 September 2016 in IEEE Magnetics Letters
The dependence of exchange stiffness and domain wall width on spacer layer material and thickness in double-layer Co 20 Fe 60 B 20 films is investigated. The exchange stiffness and wall width are inferred from magneto-optic Kerr microscope images of domain structure in conjunction with ferromagnetic resonance spectroscopy and vibrating sample magnetometer measurements of anisotropy and saturation magnetization. Samples include MgO-CoFeB-spacer-CoFeB-MgO films stacks with 0.3 nm, 0.5 nm, or 0.7 nm thick spacer layers consisting of W or Ta. These measurements allow for prediction of the thermal stability factor and nucleation diameter of magnetic tunnel junctions fabricated from these films.
1 September 2014 in Physica B: Condensed Matter
20 September 2016 in IEEE Magnetics Letters
The exchange stiffness and domain wall width of magnetic thin films with perpendicular magnetic anisotropy are obtained using Kerr microscopy in conjunction with vibrating sample magnetometer measurements. This approach requires only knowledge of saturation magnetization, the effective out-of-plane anisotropy energy, and an image of the demagnetized domain pattern, from which the demagnetization energy and domain wall length are determined. The demagnetization energy is calculated from the image using a Rhodes-Rowlands based approach, while domain wall length is estimated using an image processing algorithm. By relating the effect of domain periodicity on both the demagnetization energy and the domain wall length, an expression for the domain wall energy, and thus exchange stiffness, is constructed. This provides a room-temperature measurement of exchange stiffness in demagnetized unpatterned films. Results are compared with analytical solutions for idealized domain patterns, and a CoFeB/MgO stack is measured as a test case.