1 October 2006 in Journal of Engineering Mechanics
An improved accurate closed-form wave function analytic solution of two-dimensional scattering and diffraction of antiplane SH waves by a semicircular cylindrical hill on an elastic half space is presented. In the previous solution, stress and displacement residual auxiliary functions were defined at the circular interface above and below the circular hill. The method of weighted residues (moment method) was used to solve for the unknown scattered and transmitted waves by requiring each term of Fourier series expansion of these auxiliary residual functions to vanish. It was found that the stress residual amplitudes on both (left and right) rims of the hill (ideally should be zero) are not numerically insignificant, irrespective of how many terms used. It was pointed out that the shear stress at the rim is infinite, and that the stress auxiliary function is discontinuous at both rims of the hill, exhibiting a problem for the numerical solution that is more complicated than Gibbs’ phenomenon. The problem with the overshoot of the stress residual amplitudes at the rim was most likely numerical. In this paper, all displacement and stress waves were expressed as cosine functions, and the solution of the circular hill problem was reformulated in this paper, and, for the solution to be correct, the computed stress and displacement residual amplitudes were shown to be numerically negligible everywhere, including those at both rims of the hill. Displacements at higher frequencies are also computed.
1 December 2004 in Earthquake Engineering and Engineering Vibration
1 February 1996 in Journal of Engineering Mechanics
The weighted residual method was applied to the problem of scattering and diffraction of plane SH-waves by an underground inclusion of a different elastic medium and of arbitrary shape in a two-dimensional half-space. Results from the application of the weighted residual approach to the case of an underground circular inclusion closely approximate those obtained using the closed-form solution for underground inclusions. To demonstrate the versatility of the method, it was applied to inclusions of elliptical and square shape. It was shown that significant ground-motion amplification, with respect to the amplitude of the incident waves, occurred due to the presence of an inclusion or cavity. Amplifications were dependent on the size, shape, and depth of the inclusion as well as the frequency and angle of incidence of the incident waves. Amplification profiles for the lower-frequency incident waves were simple with peak values that did not differ significantly from 2, the value expected on the surface of a uniform half-space. As the frequency is increased, amplification profiles become more complicated with worst-case values exceeding 7 for elliptical-shaped inclusions.
1 February 2022 in Soil Dynamics and Earthquake Engineering
22 September 2015 in Journal of Earthquake Engineering
AAAlongkorn Amornwongpaibun
Alongkorn Amornwongpaibun
A closed-form wave function analytic solution of two-dimensional scattering and diffraction of incident plane SH-waves by a shallow semi-elliptical hill with a concentric elliptical tunnel on an elastic half-space is presented. This research extends the previous solution by authors in 2013 which addressed only the semi-elliptical hill, to a hill-tunnel system. Ground surface displacement near the hill are studied and exhibited. It was observed from the results that the aspect ratio of hill and tunnel profiles, frequency of incident waves, and incident angles are the primary factors that may affect the surface ground motion amplitudes near the hill-tunnel system.
14 March 2022 in Soil Dynamics and Earthquake Engineering