Neophytos Lophitis

Neophytos Lophitis

Auto-generated profile, based on publicly available information

Neophytos Lophitis

University of Nottingham

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
PPPanagiotis A. Panagiotou
Panagiotis A. Panagiotou
IAIoannis Arvanitakis
Ioannis Arvanitakis
NLNeophytos Lophitis
Neophytos Lophitis
Jose Alfonso Antonino DaviuJose Alfonso Antonino Daviu
Jose Alfonso Antonino Daviu
Konstantinos N. GyftakisKonstantinos N. Gyftakis
Konstantinos N. Gyftakis
This work offers a reliable solution to the detection of broken rotor bars in induction machines with a novel methodology, which is based on the fact that the fault related harmonics will have oscillating amplitudes due to the speed ripple effect. The method consists of two main steps: Initially, a time-frequency transformation is used and the focus is given on the steady-state regime; thereupon, the fault related frequencies are handled as periodical signals over time and the classical Fast Fourier Transform is used for the evaluation of their own spectral content. This leads to the discrimination of sub-components related to the fault and evaluation of their amplitudes. The versatility of the proposed method relies on the fact that it reveals the aforementioned signatures to detect the fault, regardless of the spatial location of the broken rotor bars. Extensive finite element simulations on a 1.1MW induction motor and experimental testing on a 1.1kW induction motor lead to the conclusion that, the method can be generalized on any type of induction motor independently from the size, power, number of poles and rotor slot numbers.

14 January 2013 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
NLNeophytos Lophitis
Neophytos Lophitis
MAMarina Antoniou
Marina Antoniou
FUFlorin Udrea
Florin Udrea
FBFriedhelm D. Bauer
Friedhelm D. Bauer
INIulian Nistor
Iulian Nistor
JVJan Vobecky
Jan Vobecky
This paper focuses on the causes that lead to the final destruction in standard gate-commutated thyristor (GCT) devices. A new 3-D model approach has been used for simulating the GCT which provides a deep insight into the operation of the GCT in extreme conditions. This allows drawing some conclusions on the complex mechanisms that drive these devices to destruction, previously impossible to explain using 2-D models.

22 June 2017 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
MAMarina Antoniou
Marina Antoniou
NLNeophytos Lophitis
Neophytos Lophitis
FUFlorin Udrea
Florin Udrea
FBFriedhelm Bauer
Friedhelm Bauer
UVUmamaheswara Reddy Vemulapati
Umamaheswara Reddy Vemulapati
UBUwe Badstuebner
Uwe Badstuebner
In this letter, we present the “anode-side” SuperJunction trench field stop+ IGBT concept with drift region SuperJunction pillars placed at the anode side of the structure rather than the cathode side. The extent of the pillars toward the cathode side is shown to pose a tradeoff between fabrication technology capabilities (and cost) versus the device performance, by extensive TCAD simulations. The proposed device structure simplifies the fabrication requirements by steering clear from the need to align the cathode side features with the SuperJunction pillars. It also provides an extra degree of freedom by decoupling the cathode design from the SuperJunction structure. Additionally, the presence of SuperJunction technology in the drift region of the “anode-side” SJ Trench FS+ IGBT results in 20% reduction of ON-state losses for the same switching energy losses or, up to 30% switching losses reduction for the same ON-state voltage drop, compared with a 1.2-kV breakdown rated conventional FS+ Trench IGBT device. The proposed structure also finds applications in reverse conducting IGBTs, where a reduced snapback can be achieved, and in MOS-controlled thyristor devices.

15 May 2015 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
MAM. Antoniou
M. Antoniou
NLN. Lophitis
N. Lophitis
FBF. Bauer
F. Bauer
INI. Nistor
I. Nistor
MBM. Bellini
M. Bellini
FUF. Udrea
F. Udrea
In this letter, a trench-insulated gate bipolar transistor (IGBT) design with local charge compensating layers featured at the cathode of the device is presented and analyzed. The superjunction or reduced surface effect proves to be very effective in overcoming the inherited ON-state versus breakdown tradeoff appearing in conventional devices, such as the soft punch through plus or field stop plus (FS+) IGBTs. This design enhances the ON-state performance of the FS+IGBT by increasing the plasma concentration at the cathode side without affecting either the switching performance or the breakdown rating.

12 September 2018
Verified
Book Chapter
Open access
PDF file
NLNeophytos Lophitis
Neophytos Lophitis
AAAnastasios Arvanitopoulos
Anastasios Arvanitopoulos
SPSamuel Perkins
Samuel Perkins
MAMarina Antoniou
Marina Antoniou
Technology computer-aided Design (TCAD) is essential for devices technology development, including wide bandgap power semiconductors. However, most TCAD tools were originally developed for silicon and their performance and accuracy for wide bandgap semiconductors is contentious. This chapter will deal with TCAD device modelling of wide bandgap power semiconductors. In particular, modelling and simulating 3C- and 4H-Silicon Carbide (SiC), Gallium Nitride (GaN) and Diamond devices are examined. The challenges associated with modelling the material and device physics are analyzed in detail. It also includes convergence issues and accuracy of predicted performance. Modelling and simulating defects, traps and the effect of these traps on the characteristics are also discussed.

3 June 2019 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ATAmit K. Tiwari
Amit K. Tiwari
MAMarina Antoniou
Marina Antoniou
NLNeophytos Lophitis
Neophytos Lophitis
SPSamuel Perkins
Samuel Perkins
TTTatjana Trajkovic
Tatjana Trajkovic
FUFlorin Udrea
Florin Udrea
In this paper, we propose the use of a retrograde doping profile for the p-well for ultrahigh voltage (>10 kV) SiC IGBTs. We show that the retrograde p-well effectively addresses the punchthrough issue, whereas offering a robust control over the gate threshold voltage. Both the punchthrough elimination and the gate threshold voltage control are crucial to high-voltage vertical IGBT architectures and are determined by the limits on the doping concentration and the depth that a conventional p-well implant can have. Without any punchthrough, a 10-kV SiC IGBT consisting of retrograde p-well yields gate threshold voltages in the range of 6-7 V with a gate oxide thickness of 100 nm. Gate oxide thickness is typically restricted to 50-60 nm in SiC IGBTs if a conventional p-well with 1 x 10¹⁷ cm⁻³ is utilized. We further show that the optimized retrograde p-well offers the most optimum switching performance. We propose that such an effective retrograde p-well, which requires low-energy shallow implants and thus key to minimize processing challenges and device development cost, is highly promising for the ultrahigh-voltage (>10 kV) SiC IGBT technology.