28 October 2022 in IEEE Access
For beyond the fifth-generation (5G) and future wireless communications, spatial consistency that represents the correlation between propagation channel characteristics in close proximity has become one of the major issues in channel modeling to describe channels more realistically in emerging scenarios, such as device-to-device (D2D). In this study, we propose a novel path loss model based on multi-dimensional Gaussian process regression (GPR) that provides spatial consistency to channels in propagation environment by predicting local shadow fading while fitting large-scale path loss from measured data. The proposed model has a special structure consisting of a radial mean function and local shadow fading term, which are modeled by independent Gaussian Processes. In contrast to the log-distance path loss model and other regression-based models, the proposed model trains two functions simultaneously; thus, predicts path loss well by capturing both global tendency and local correlation. Moreover, because the proposed model is based on GPR, it provides uncertainty of the predicted path loss. We validated the performance of the proposed model in terms of prediction accuracy with the measurement datasets from two different indoor environments. Our experiments showed that the proposed model predicts better than the log-distance path loss model, especially when spatial correlation becomes significant. The proposed model can be used to simulate path loss in a general environment after training the measurement data.
1 September 2021 in IEEE Communications Letters
Rainfall is considered as one of the most crucial atmospheric elements that cause attenuation in signal propagation, especially in high-frequency range for fifth-generation (5G) and beyond wireless networks. To unveil the complex relationships between rain attenuation and other factors including rainfall rate, we propose a new rain attenuation prediction model for terrestrial line-of-sight (LoS) propagation using Gaussian Process Regression (GPR). In the proposed model the Recommendation ITU-R P.530 (called the ITU-R model) is used as the mean function in GPR, and to capture the deviation of measured rain attenuation from the ITU-R model we develop a latent function in GPR motivated from the ITU-R model. We validate with the ITU-R study group 3 databank (DBSG3) that the proposed model provides high prediction accuracy.
26 October 2018 in Signal Processing
29 June 2020 in IEEE Transactions on Vehicular Technology
In this paper, a calibration of multiple-input multiple-output (MIMO) channel sounders with internal crosstalk is considered. The objective is to minimize the number of back-to-back (B2B) connections required to estimate the transmitter (Tx) and receiver (Rx) response matrices that convey the information about linear distortion and internal crosstalk. A signal and system model is developed for the B2B measurements, where only some pairs of the Tx and Rx ports of the sounder are utilized among all pairs of the ports. Using the measurement model, a least-square estimation problem is then formulated and converted in the frequency domain to weighted rank-one approximation problems. The notion of system identifiability of a MIMO channel sounder is introduced and some optimal sets of B2B connections are proposed. Given a proposed optimal set of B2B connections, the alternate convex search (ACS) algorithm with a proper initialization is also proposed to solve the weighted rank-one approximation problems. Finally, it is shown how to calibrate field measurement data by using the estimated response matrices. Numerical results show that, only after a couple of iterations, the ACS algorithm with the proposed initialization achieves a comparable identification and calibration performance to the conventional method that requires the B2B connections of all port pairs.
2 February 2026 in IEEE Transactions on Wireless Communications
OTFS faces inter-symbol interference (ISI) due to delay and/or Doppler spreads, which requires compensation with an equalizer. In addition, in multiple access scenarios where users traverse distinct channels, OTFS also encounters multi-user interference (MUI). Hence, MUI is more challenging to mitigate than intra-user ISI and becomes more severe in high-mobility scenarios, where OTFS is typically deployed. This paper proposes a novel method called pre-equalized multi-user OTFS (PreEQ-MU-OTFS), which applies pre-equalization at the transmitter, using linear precoders for each user to fundamentally mitigate MUI. Specifically, the precoder is derived by initializing with the modified Wiener filter and employing a single step of iterative minimization. Additionally, the receiver in this method requires only per-user scaling, instead of full equalization. By leveraging the property of OTFS whereby fast-varying channels exhibit nearly time-invariant characteristics in the delay-Doppler (DD) domain, PreEQ-MU-OTFS performs effectively in high-mobility channels. The proposed method demonstrates superior bit error rate (BER) performance compared to conventional post-equalization receivers such as minimum mean square error (MMSE), MMSE-successive interference cancellation (MMSE-SIC), message passing (MP), and maximum-ratio combining (MRC) receivers. This method is validated in realistic channel scenarios with moving reflectors and practical channel aging levels.