18 April 2017 in Advanced Materials
3 January 2017 in Journal of Materials Chemistry A
Bilayer membranes that can morph in a controlled manner were prepared by restacking exfoliated layers of clay and graphene oxide (GO) from their respective aqueous dispersions.
26 March 2019 in Journal of Materials Chemistry A
The reactive surface and layered crystal structure of vanadium pentoxide (V2O5) are exploited here to prepare a two-dimensional (2D) ion pump that transports ions against their concentration gradient.
26 April 2018 in Journal of Materials Chemistry A
The balance between expanding and contracting forces of lamellar clay minerals was exploited for preparing self-repairable nanofluidic membranes. Application of a tiny drop of water (20 μL) not only healed physical damages of lamellar vermiculite membrane, such as punching a hole, scratching with a sharp object or breaking into multiple pieces, but also completely recovered its nanofluidic ionic conductivity. The extraordinary thermal stability of the clay layer was exploited to perform the healing experiment at elevated temperature, reducing the healing time to just 30 seconds at 140 °C. Experiments with different charge balancing cations and in situ monitoring of the healing process through X-ray diffraction studies suggest that cations with hydration energy higher than the energy of the clay-cation attraction, such as that of Li+, initiate water-assisted swelling of the layers, which leads to the re-assembling of the flakes in the damaged sites. The dependence of vermiculite-swelling on the nature of interlayer cations is also exploited for preparing highly responsive bilayer membranes by assembling clay flakes with different charge balancing cations. The water-assisted swelling of Li-vermiculite is also utilized to fuse them with lamellar membranes of other 2D materials such as graphene oxide and vanadium pentoxide. Even though vermiculite sheets are electrically insulators, air dried vermiculite membranes exhibit an interesting self-healable humidity dependent conductivity.
28 June 2018 in Materials Chemistry Frontiers
The chemical similarity of graphene oxide (GO) and humic acid has been exploited to fine-tune the ionic and molecular transport properties of a lamellar GO membrane. Introduction of humic acid (in 10, 15 and 20%) is found to improve the nanofluidic transport characteristics, such as ionic mobility, molecular selectivity, diffusivity and permeability, of the GO membrane. Remarkably, the membrane prepared with 15% humic acid displayed superior proton mobility (μH = 1.04 × 10−4 cm2 V−1 s−1), in-plane diffusivity (D = 4.8 × 10−6 cm2 s−1), and cross-plane permeability (PL = 2.03 × 10−4 mm g cm−2 s−1 bar−1) to the pure GO and other composite membranes. The favorable nanofluidic characteristics of the 15% membrane are attributed to the larger effective heights of the 2D nanochannels, derived from the onset point of the surface charge governed ionic conductivity of the membranes. The activation energy of proton transport (∼0.07 to 0.1 eV) confirmed the occurrence of a Grotthuss-like hopping mechanism in all the GO–HA membranes. Introduction of humic acid into two-dimensional GO channels also improved the solution stability and mechanical robustness of the pristine GO membrane. The lamellar GO–HA membranes were also found to be suitable for energy harvesting applications such as direct methanol fuel cells and reverse electrodialysis. Remarkably, even after 72 hours exposure to electrolyte solutions, open circuit potentials up to 0.05 V, 0.21 V, and 0.12 V were found for the 10, 15, and 20% membranes, respectively.
6 May 2024 in Advanced Functional Materials
Nano‐ and angstrom‐scale channels fabricated from 2D‐layered materials provide a unique platform for studying fluidic behavior at atomic‐scale confinement, with applications in desalination, osmotic power generation, and fuel cells. While various fabrication methods exist, achieving precision, scalability, and minimal fabrication time is challenging. Ultramicrotomy‐based nanofabrication is shown here as an efficient approach to create nanofluidic membranes containing nanochannels with atomically flat walls. This approach is compatible with both bottom–up nanolaminates and top–down nanochannels, produces multiple devices from the same 2D assembly and allows swift variation of channel length. Integration of these membranes into macroscopic silicon fluidic‐chips is achieved maintaining the structural and functional properties. The robustness of the sliced membranes is demonstrated through restacked vermiculate laminates that sustain applied pressures and generate ionic streaming currents. Sliced pristine vermiculite channels exhibit charge‐selective ion transport, leading to osmotic power density (Posm/A) ranging from 9.2 to 300.4 Wm−2 under various KCl concentration gradients. Maximum conversion efficiency of 23.3% is obtained at a 100‐fold gradient, yielding Posm/A of 234.6 Wm−2. Short channel lengths sliced by ultramicrotomy contribute to high Posm/A, promising applications of miniature energy devices for pressure‐driven electricity generation and osmotic power generation.