Joong Yeon Lim

Joong Yeon Lim

Auto-generated profile, based on publicly available information

Joong Yeon Lim

Dongguk University Seoul , Seoul Korea

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Science and Engineering of Composite Materials
Verified
Journal Article
Open access
PDF file
JLJoong Yeon Lim
Joong Yeon Lim
HKHan-Wool Kim
Han-Wool Kim
MPMin-Wook Park
Min-Wook Park
In this study, the effective elastic modulus ( E c ) of a cellulose nanocrystal fiber reinforced polymer composite was evaluated using the Mori-Tanaka and finite element (FE) model. The FE model was generated using a representative volume element with a periodic boundary condition. The mass fractions of the fiber in the composites ( MF f ) were set to 1, 2, and 3 wt.%. Elastic modulus values for interphase were input and were either uniform or exhibited a gradient. The E c for the uniform interphase region increased significantly with MF f , but was relatively low for interphase regions exhibiting a gradient. The results show that interphase parameters must be considered carefully when predicting E c using the FE model.

2 April 2020 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
PDF file
HKHan-Wool Kim
Han-Wool Kim
YKYoung-Seong Kim
Young-Seong Kim
JLJoong Yeon Lim
Joong Yeon Lim
The development of additive manufacturing technology has facilitated the production of cellular structures such as lattices. Topology optimization is a tool for computing the optimal geometry of an object within certain conditions, and it can be used to increase the stiffness and decrease the weight. In this study, a “double-optimized lattice structure” was designed by applying the solid isotropic material with penalization method for topology optimization twice, first to optimize the unit cell of the lattice and then to grade and insert the cells into a global model. This design was applied to a Messerschmitt–Bölkow–Blohm beam and produced via material extrusion additive manufacturing. Subsequently, it was evaluated by a three-point bending test, and the results indicated that the double-optimized lattice beam had a 1.6–1.9 fold greater effective stiffness and a 2 fold higher ultimate load than the values obtained for the beam designed with conventional methods. Thus, the double-optimized lattice structure developed herein can be an effective material with regard to its low weight and high stiffness. Contrarily, the penalty factor p of the solid isotropic material with penalization did not affect the properties. This finding suggests that p can control homogeneity while maintaining the strength of the structure.

1 December 2020 in The Journal of Prosthetic Dentistry
Verified
Journal Article
Closed access
EBEun-Jeong Bae
Eun-Jeong Bae
HKHyun-Soo Kim
Hyun-Soo Kim
JLJoong Yeon Lim
Joong Yeon Lim

1 January 2022 in Dental Research Journal
Verified
Journal Article
Open access
PDF file
JLJoong Yeon Lim
Joong Yeon Lim
EBEun-Jeong Bae
Eun-Jeong Bae
JKJi-Hwan Kim
Ji-Hwan Kim
Background: The purpose of this in vitro study is to fabricate a novel metal–ceramic prosthesis with a porous structure, to compensate for the disadvantages associated with the design of existing prostheses, and to measure the internal fit of this prosthesis. Materials and Methods: In this in vitro study, the mandibular first molar was scanned from the dental computer-aided-design to design a 3 mm porous structure frame. The frame was produced using the lamination method and fired in a pressed ceramic. For comparison, pore-free specimens were fabricated by selective laser sintering (SLS) as described above, and porous specimens were fabricated by casting (total n = 30). The internal fit was then measured using a digital microscope (at 100× magnification), and the data were analyzed using one-way ANOVA (α = 0.05). Results: The total mean internal discrepancies for each group were 42.32 ± 22.50 μm for the porous structure SLS group (PS-group), 107.54 ± 38.75 μm for no-porous casting group (group), and 121.36 ± 50.19 μm for the no-porous SLS group (group), with significant differences (P < 0.05) among all groups. Conclusion: The internal discrepancies of porous structure crown fabricated by SLS were smaller than that of no-porous crown fabricated by casting and SLS. Based on these laboratory findings, further studies should be conducted to evaluate the feasibility of the newly designed porous structure and press ceramic prosthesis to determine whether they can be applied in clinical practice.

1 January 2020 in Science and Engineering of Composite Materials
Verified
Journal Article
Open access
PDF file
HKHan-Wool Kim
Han-Wool Kim
MPMin-Wook Park
Min-Wook Park
JLJoong Yeon Lim
Joong Yeon Lim
Article Effect of interphase parameters on elastic modulus prediction for cellulose nanocrystal fiber reinforced polymer composite was published on January 1, 2020 in the journal Science and Engineering of Composite Materials (volume 27, issue 1).