24 November 2020 in Wind Energy
The power production of the Lillgrund wind farm has been investigated by means of SCADA data covering almost 10 years of operation, wake models and numerical simulation tools, such as WindSim, OpenFOAM and ORFEUS. The analysis of the SCADA data provided the quantification of wake losses and of blockage effects, results that enable a benchmark to assess the uncertainty of other numerical methods of industrial use. The results have been analysed in terms of global array efficiency for different wind directions, wind velocity and stratification conditions. A comparison of the present results with the Jensen and Ainsle models indicated that the two used wake models are affected by an error of about 8–10% in the estimation of the array efficiency, while the error does not vary significantly when using numerical tools such as ORFEUS, WindSim and OpenFOAM. By comparing wind statistics available before the park construction, an assessment of the blockage of the Lillgrund farm was performed with contrasting results from the other numerical tools, highlighting how challenging is to assess farm blockage with current industrial settings.
1 January 2012 in Energy Procedia
The wakes induced by the wind turbines are modeled with the finite-volume code WindSim, based on the solving of the Reynolds Averaged Navier-Stokes (RANS) equations of an Atmospheric Boundary Layer. The RANS equations of an uncompressible flow are solved with a multigrid coupled solver (MIGAL); turbulence is closed with the RNG k-ɛ model. The rotor of a wind turbine is modeled by an actuator disc providing a resistive force which is calculated from the thrust coefficient curve of wind turbine. The axial thrust can be distributed over the swept area in three different manners: by a uniform, parabolic or a polynomial distribution.A wake is therefore generated downstream of each turbine with wake deficit and induced turbulence.When using the actuator disc technique it is also interesting to observe how the wake-wake, wake-terrain interactions are predicted; moreover, also simulations with actuator discs and flows with thermal effects can be carried out.In this work we present first a series of simulations over a single turbine for a grid sensitivity study, in the second part a validation against production data from the offshore wind farm Horns Rev is presented
1 January 2013 in Energy Procedia
In this work a practical approach to Computational Fluid Dynamics (CFD) simulations in wind resource evaluation is proposed in a test case of the IEA project (task 31) “Wakebench” focused on the benchmarking of wind wakes models. The proposed method uses an easy wake model, the Actuator Disc (AD), in a CFD approach, in order to understand the wind behavior in a complex wind farm of 18 turbines sited in the northern part of Netherlands, with a sustainable computational load. In order to optimize the simulation results a useful tool that automates the parameters evolution was developed; such tool is able to improve the control of the engineering parameters and is useful to prepare advanced post processing. The study was mainly focused on the analysis of the single wake; also simulations on the double wake case and other tests on larger wind farm were performed with success using the same automatic approach. Results are in quite good agreement with experimental data and the differences between the predicted and experimental results are to be addressed to: global effect of stability, turbine inferences in the actual wind farm and to some lacks in physical wake model
1 January 2014 in Energy Procedia
The following article will validate the results obtained using the actuator disc method in the state of the art numerical Computational Fluid Dynamic (CFD) tool WindSim using on-site measurements from the offshore wind farm Lillgrund. WindSim solves the mass, momentum and energy conservation equations using the Reynolds Average Navier Stokes (RANS) method. Emphasis will be put here on investigating how the choice of different parameters influences the results, and comparisons will be performed with experimental data. The quantity that will be compared is the individual energy production of the wind turbines for different grid resolutions, inflow angles, thrust radial distributions and turbulence closure models
1 June 2013 in Wind Engineering
This paper is focusing on the wake modeling in large offshore wind farms. Over the sea the ambient turbulence is much lower than onshore, wakes persist for long distances, mixing in a complex pattern. Hence an accurate evaluation of the wakes become crucial in the estimation both of the production and loads. Regarding loads the main effect of the turbines wakes is an increase of turbulence compared to the ambient one. A careful assessment of the wakes is therefore required when analyzing offshore wind farms. The approaches in estimating the wake losses go from simple theoretical or empirical laws to full rotor aerodynamic calculations; in between there is a range of intermediate calculations. Two approaches will be presented: the use of relative simple equations (also called analytical models) which are the standards in the wind resource assessment and a more accurate, but computationally more demanding, the actuator disc technique.
10 October 2018 in Journal of Physics: Conference Series
In the present study it is discussed a sensitivity analysis on input parameters of a CFD resource assessment methodology built on top of OpenFOAM 4.1, a well-known open source library for numerical fluid dynamics. RANS are solved for dry uncompressible air, the Atmospheric Boundary Layer is calculated without thermal effects (neutral conditions). It is highlighted how the control of a metric based upon a weighted root mean square error (wRMSE) of the local accelerations (speed ups) can guide the wind analyst in the design of the computational mesh and further numerical settings. Moreover, it will be quantified the wRMSE as a function of the distance to the measurement points. The parameters analysed are the horizontal extension of the model, the horizontal resolution within the refined area, which is covering the layout of the wind farm, three different versions of k-ε turbulence closure and the number of directional sectors considered.