The reliabilities of the renewable energy source systems are affected by their inverter structures. So, an inverter topology with higher reliability reduces the maintenance cost of the system. In this paper, a multilevel inverter structure is proposed with improved reliability and reduced component count. The proposed structure produces seven and eleven voltage levels in symmetrical asymmetrical configuration, respectively. This inverter topology utilizes six unidirectional switches and one bidirectional switch. The proposed inverter structure can be extended to generate any number of voltage levels with the inherent property of producing both positive and negative voltage levels. Various comparisons including the total number of switches, the total number of switch drivers, and the total blocking voltage are done to show the effectiveness of the proposed structure in the reduction of the component counts. In addition, the reliability of the proposed structure is analyzed and comparisons with other counterpart structures are studied. The comparison results show the reliability improvement of the proposed inverter structure. Finally, the simulation results, extracted by MATLAB/Simulink, and the experimental results, obtained from a laboratory prototype are provided to prove the feasibility of the proposed multilevel inverter structure.
In the context of the electric vehicle (EV) industry, multi-level inverters (MLIs) have garnered increasing attention due to their potential to harness the advantages of higher DC link voltages. Among the various MLIs, the three-level T-type neutral-point-clamped (T-NPC) topology stands out as a superior alternative to the conventional two-level six-switch counterpart. This paper presents an adaptive Space Vector Modulation (SVM) technique for the typical three-level T-NPC inverter, with the aim of enhancing inverter performance across a wide speed spectrum in EVs. Through a comprehensive process of design, simulation, and experimental analysis, the findings reveal improvements in efficiency when compared to both the two-level six-switch inverter and the T-NPC inverter employing conventional three-level SVM. These results underscore the advantages and effectiveness of the introduced control scheme, which increases efficiency without incurring additional costs of any additional circuit components or control effort. The paper provides a complete set of in-agreement simulation and experimental results, to provide the proof of concept.
23 December 2024 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
This paper presents a novel Reconstructed Voltage Model Predictive Control (RVMPC) approach for a three-level T-type Neutral Point Clamped (T-NPC) inverter. Unlike the conventional model predictive controllers, which require exhaustive searches across the entire finite state space, the proposed method uses the load model to estimate the reference voltage and exploit a Level-Shifted Pulse Width Modulation (LSPWM) technique to control the switching actions. The integration of RVMPC with LSPWM not only ensures a consistent switching frequency throughout operation but also effectively balances the midpoint DC-link voltage. Additionally, the proposed modulation technique significantly reduces the computational time and complexity compared to the existing Finite Control Set Model Predictive Control (FCS-MPC) methods. By eliminating the need to search the entire state-space, the approach does not require optimization of weight factors or cost function control, thereby simplifying the overall design. The proposed RVMPC method reduces computational time from 17 μs (as seen in the conventional FCS-MPC) to 6 μs, achieving a 64.7% reduction. Furthermore, it improves DC-link voltage utilization and enhances the inverter performance, with a 7% reduction in line-to-line total harmonic distortion (THD) and over 72% improvement in phase current THD. The effectiveness and performance of the proposed modulation technique are validated through computer simulations and experimental verification on a small-scale laboratory prototype.
6 August 2025 in IEEE Transactions on Transportation Electrification
In this article, a novel multisource inverter (MSI) topology for hybrid energy storage systems (HESSs) in electric vehicle (EV) applications is proposed. An HESS in EV applications combines battery packs with ultracapacitors (UCs) to enhance the overall performance. This integration leverages the complementary characteristics of both technologies in which batteries provide high energy density for long-range operation, while UCs offer high power density for rapid charging and discharging during acceleration, regenerative braking, and other high-power events. The proposed topology enables the combination of all possible dc sources with fewer semiconductor components, thereby optimizing cost, weight, complexity, and power density due to the elimination of the magnetic elements from the circuit. Hence, an energy management system (EMS) is necessary to manage the energy between dc sources. Simulation and experimental results demonstrate that the proposed MSI topology achieves high efficiency, and the proposed EMS can control the system properly under various operating conditions. The proposed MSI offers higher efficiency in all modes of operations up to 1.85% compared with those existing MSIs that can produce all dc source combinations. Furthermore, the proposed topology can enhance the performance and reliability of the ac side loads by utilizing multiple energy storage sources simultaneously, thus improving energy utilization and reducing the dependence on a single energy source aiming to optimize energy efficiency, extend battery life, improve vehicle performance, and potentially reduce the overall size and cost if the energy storage system in EVs.