Gerencia Centro de Investigación Laboratorio Argentino de Haces de Neutrones (LAHN), Centro Atómico Constituyentes, Comisión Nacional de Energía Atómica, Av. General Paz 1499, San Martín, Buenos Aires B1650, Argentina
Auto-generated profile, based on publicly available information
Paula Y. Steinberg
Gerencia Centro de Investigación Laboratorio Argentino de Haces de Neutrones (LAHN), Centro Atómico Constituyentes, Comisión Nacional de Energía Atómica, Av. General Paz 1499, San Martín, Buenos Aires B1650, Argentina
Mesoporous titania thin films (MTTFs) with well ordered cubic array of mesopores were synthesized on glass and silicon substrates using Brij 58 as template. The effect of the thermal treatment and the substrate on the structural parameters (thickness, porosity, pore order, crystallinity) and the mechanical properties of MTTFs were determined by electron microscopy, X-Ray diffraction, Raman spectroscopy, 2D-Small Angle X-Ray Scattering, ellipsometric porosimetry and nanoindentation. Clear differences in the mesostructural order evolution and crystallization behavior were observed as a function of the substrate and the thermal treatment. In particular, the anatase crystallization process occurs at lower temperatures for samples prepared on silicon when compared with samples prepared on glass, due to the balance between nanocrystals formation, mass diffusion and Na+ migration from the substrate. As a consequence of such phenomena, the MTTFs mechanical properties are also dependant on the substrate. For samples prepared on glass the 325 - 350°C range is the optimal annealing temperature to maximize the mechanical properties (E value of 45 GPa), while higher temperatures can be used for the Si supported oxides, to reach E values of 60 GPa. The obtained anatase crystal dimensions (below 4-5 nm) are restricted by the wall thickness, indicating the chosen thermal treatment prevents mesoporous structure to collapse even when the oxide presents thin walls and small pores, preserving high porosity and high porous ordering. As a consequence, the presented Brij 58 templated MTTFs present smaller crystalline domains than analogous materials with thicker walls. Such properties could be exploited for applications in photocatalysis and titania-based solar cells.
25 April 2019 in Physical Chemistry Chemical Physics